Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

HTB2 boost question

Thread Tools
 
Search this Thread
 
Old 01-26-2009, 08:50 PM
  #1  
Registered User
Thread Starter
 
bandedgandr's Avatar
 
Join Date: Oct 2007
Location: MN
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
HTB2 boost question

I have 2 questions.

I`m not seeing more than 30psi with my turbo. Its a 62/65/12. My mods are in my sig. I thought these wastegates were good for 40psi. Any info?

Second part. My cruising egts are 780-900 degrees. I have a 4" db and 4" exhaust. Thats with the adr. on pl02.
Old 01-27-2009, 05:27 AM
  #2  
Registered User
 
97 D-Tec's Avatar
 
Join Date: Oct 2007
Location: Florida
Posts: 507
Likes: 0
Received 0 Likes on 0 Posts
you probably have a boost leak somewhere
Old 01-27-2009, 06:15 AM
  #3  
Registered User
 
Redliner's Avatar
 
Join Date: May 2006
Location: Rising Sun, MD
Posts: 470
Likes: 0
Received 0 Likes on 0 Posts
Do you have injectors? Check for leaks.
Old 01-27-2009, 10:06 AM
  #4  
Registered User
Thread Starter
 
bandedgandr's Avatar
 
Join Date: Oct 2007
Location: MN
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
No, stock injectors. The only thing I removed was the coupling from the turbo to the intercooler. Could my other couplings possibly fail, or do I need to bump up to bigger inkectors. Even with my adrenalin on pl08 it`ll light rather quick, but still will only hit 30psi. Would being -below zero cause this?
Old 01-27-2009, 07:48 PM
  #5  
Registered User
Thread Starter
 
bandedgandr's Avatar
 
Join Date: Oct 2007
Location: MN
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
if i clamp the vacuum line fron the wastegate to the housing it`ll boost over 30psi. im lost...
Old 01-27-2009, 09:29 PM
  #6  
Registered User
 
dieselrob's Avatar
 
Join Date: Jan 2005
Location: eastern pa
Posts: 915
Likes: 0
Received 0 Likes on 0 Posts
Sometimes the wastegates arent set to what they say. You can adjust it by turning the actuator rod. I dont remember the direction 100% but i think you turn it so it get longer to raise boost.
Old 01-28-2009, 08:41 AM
  #7  
Registered User
Thread Starter
 
bandedgandr's Avatar
 
Join Date: Oct 2007
Location: MN
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Ok, then how do you get at it? Do I hav eto take the turbo off again?

Trending Topics

Old 01-28-2009, 04:38 PM
  #8  
Registered User
 
Tate's Avatar
 
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes on 0 Posts
You want to make the rod shorter to increase boost.
Old 01-28-2009, 05:06 PM
  #9  
Registered User
 
98.5Hotrod's Avatar
 
Join Date: Oct 2007
Location: SE MI
Posts: 375
Likes: 0
Received 0 Likes on 0 Posts
x2 what Tate said.
Old 01-28-2009, 09:14 PM
  #10  
Registered User
 
dieselrob's Avatar
 
Join Date: Jan 2005
Location: eastern pa
Posts: 915
Likes: 0
Received 0 Likes on 0 Posts
Ahh i was close, its been awhile. I did them off the truck with shop air befor. I never tried to squeeze my and tools in there while its bolted up.
Old 01-29-2009, 07:58 PM
  #11  
Registered User
 
powermad's Avatar
 
Join Date: Jul 2007
Location: california
Posts: 727
Likes: 0
Received 0 Likes on 0 Posts
your not putting that much fuel into it. i was only seeing 30 with my edge box then i did injectors and the watermeth now i see 42 all day.
Old 01-30-2009, 08:22 AM
  #12  
Registered User
 
mcoleman's Avatar
 
Join Date: Apr 2003
Location: Backwoods of Missouri CSA
Posts: 1,346
Likes: 0
Received 0 Likes on 0 Posts
You don't have the fuel to see over 30 pounds. Most of the HTT chargers are set at 42 psi. That's plenty of boost for stock head bolts and gaskets. Put some sticks in and it will go up.
Old 01-30-2009, 02:53 PM
  #13  
Registered User
Thread Starter
 
bandedgandr's Avatar
 
Join Date: Oct 2007
Location: MN
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
So when I clamp the wastegate line shut, i see 40psi... So if I put bigger injectors in it`ll build more boost? I can hit 30psi without a problem right now.
Old 01-30-2009, 03:05 PM
  #14  
Registered User
 
JThomas's Avatar
 
Join Date: Jun 2006
Location: Gordonsville ,Tn
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
What Tune are you running on your Adrenaline. With my buddy's truck 01 built Auto Htt 62/65/12 stock injectors With one of the comp tunes it will hit 40psi easy
Old 01-30-2009, 03:23 PM
  #15  
Registered User
 
Redliner's Avatar
 
Join Date: May 2006
Location: Rising Sun, MD
Posts: 470
Likes: 0
Received 0 Likes on 0 Posts
More fuel = more boost. Thats why I asked if you had injectors. Thats a little bit big of a turbo for stock injectors to push over 30psi.


Quick Reply: HTB2 boost question



All times are GMT -5. The time now is 04:21 AM.