Hey guys i have an 01, 2500, 4x4, CUMMINS, AUTO, 130.000 miles on her. I have an edge juice with attitude, 4" turbo back, AFE stage 2 intake, rebuilt VP44, and new lift pump. Getting 100 horse edge nozzels installed tuesday. Is that about all i can d without updating my fuel system or is this to much. The way it is i run the edge on 3 all the time, and carry about 14 PSI fuel pressure at idle, and about 7 PSI WOT!!!!!! Will the nozzels kill my VP?

 

They For Sure Won't Help! I Have All That Same Stuff And My Vp Was Killed About A Month Ago. That set up might also kill your stock LP, it did mine in about 3 times before the FASS went on.

 

How much smoke were you gettin out of here. How many miles were on your VP

 

If fp drops any lower you're going to need to do something. Start shopping now =P

 

I've been running my setup for about 30k and I haven't had any problems. (knock on wood) I do have a hard start now though. It's only a matter of time before the VP goes though.

Eric

 

I had the Mach2's on for over a year ..... maybe two (can't quite remember now) and my VP is fine. I just last month put on some 4's and still have no problems with my VP.

 

Got them installed today WOW SMOKE LOTS OF IT!!!!!!!!! Im now gettin about 24 MPG on the highway. These are great