CTD2001

My buddy bought a 3200 gov spring kit for his truck and the kit has two springs, but he was reading through the directions and they only make mention of one spring. Are both springs needed? Is there a link to some other install directions? Thanks for your help

Ramdriver15

well i had a great site a couple days ago. they had phenomanal directions, with color photos and everything i forget where though. if i can find it agian i will let you know. there is two springs in the pump. you have to put the engine at tdc for cylider 1 and change the first spring then ytou bar roll the engine till the other spring is in site and change that one. i thought the directions were at tstproducts.com but i couldnt find them.
GIT-R-Done And good luck
john

CTD2001

ok thanks for your reply, glad to hear that both springs are needed, if you find those directions, that would be great, thanks again

snow ram

http://www.pavementsucks.com/forums/...hp?topic=92070

about the 3rd or 4th post down i did a quick verbal write up of how to do your springs.... they are easier than you could ever imagine
hope this helps you out some

-Josh

CTD2001

Thanks for the link, i think that should help us out