Homemade traction bars
#1
Banned
Thread Starter
Join Date: Aug 2004
Location: Wyoming
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Homemade traction bars
The square tubing is 1-1/4" and 1/8" wall, the axle brackets are welded into place , I machined bushings for a tight fit of the 5/8" thru bolts
#2
Banned
Thread Starter
Join Date: Aug 2004
Location: Wyoming
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
The front idler is mounted from frame rail to frame rail and alows for movement of the axle as the suspension works and the bars have a pivot about 1 foot back from the hanger that allow for twisting of the frame while ditching on angles.
Thread
Thread Starter
Forum
Replies
Last Post
1bad93
1st Gen. Ram - All Topics
12
02-01-2010 01:09 PM
O.T
3rd Gen High Performance and Accessories (5.9L Only)
26
05-03-2008 09:37 AM
ckt_santiago
Performance and Accessories 2nd gen only
16
04-23-2007 09:29 AM
Ohio Joe
Performance and Accessories 2nd gen only
6
11-18-2004 09:54 AM
Nuttymopar
Performance and Accessories 2nd gen only
3
09-16-2004 12:48 PM