Hesitant to bomb, still need information
#16
Muted User
Thread Starter
Join Date: Nov 2003
Location: Clinton, AR
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re:Hesitant to bomb, still need information
I did that Capt insae, unfortunately the truck won't rev over about 1750rpm, but gets there really quick.
Berner, I saw another post somewhere about the overflow valve. I'll check that before I replace the pump.
Tomorrow is work, so I'll drive it in and check the pump pressure during lunc. Then Check the timing this next weekend when I have the proper tools.
From there, ther's no telling where I may go. At this point I only want a little extra oomph, but sounds like thats all anyone here started with too.
Thanks for all the great advice
Nick
Berner, I saw another post somewhere about the overflow valve. I'll check that before I replace the pump.
Tomorrow is work, so I'll drive it in and check the pump pressure during lunc. Then Check the timing this next weekend when I have the proper tools.
From there, ther's no telling where I may go. At this point I only want a little extra oomph, but sounds like thats all anyone here started with too.
Thanks for all the great advice
Nick
Thread
Thread Starter
Forum
Replies
Last Post
flyfsh70
3rd Gen High Performance and Accessories (5.9L Only)
6
05-08-2005 10:33 PM
BLUTIC
Performance and Accessories 2nd gen only
28
03-01-2004 05:35 AM
YinYaker
3rd Gen High Performance and Accessories (5.9L Only)
5
11-10-2003 12:28 PM