Could anyone give me some advice on what I'll need to do my own single 7" stack. I don't go to the city much but could or can order some fittings off of internet if I knew where to look. I would be going from 5 inch to the stack. also I've seen pictures of trucks with and with out the plumbing in the bed and If I can I want all the plumbing underneath. Would a couple of 90s and some flex do it? Is there a 5 inch to 7 inch fitting threw a truck exhaust supplier. I realize I need some band clamps. Just if anybody has did there own chime in please. Pictures would be nice too. Thanks.

 

http://airflo.com/index.html


lots of good exhaust parts

 

if you bring the stack straight up through the bed in line with the exhaust all you need is about a 2 foot section of flex and a 90*, plus the adapter to 7".

 

Anyone know where to get the 7 inch adapter at. And is there any place you recommend for the best deal on a 7 inch miter cut or flat top stack?

 

napa has the reducer to got from 7 to 5 but most stacks are made where they go from 7 to 5 at the bottom and that will make it easier for you