have edge comp and no gages in yet can i tow on level one?
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
have edge comp and no gages in yet can i tow on level one?
i have a edge comp that i was going to put on tomorrow before i go out of town for the weekend I will be towing about 9k. I have a FP gauge that is running at 13wot with the vulcan kit. I was only going to tow on level one and may not even tap the pump till i get gauges. Do i have my bad idea jeans on to do this.
#3
Registered User
Join Date: Sep 2003
Location: Plano, TX
Posts: 2,534
Likes: 0
Received 0 Likes
on
0 Posts
Level one is basicly an EZ. 2 and up start getting into the wire you tapped IIRC.......you should be fine if you keep your foot out of it.....
http://www.edgeproductsinc.com/dodge_ISB.html
http://www.edgeproductsinc.com/dodge_ISB.html
#4
Registered User
its never a good idea to tow without gauges. If you really feel the need you should always keep the rpms up over 1900 RPM
once you start lugging the engine, the rpm's drop and the egt soar.
believe me I tow a 10k+ 5er with an auto.
Do you have an aftermarket filter set up?
once you start lugging the engine, the rpm's drop and the egt soar.
believe me I tow a 10k+ 5er with an auto.
Do you have an aftermarket filter set up?
#6
Registered User
Join Date: Sep 2003
Location: Plano, TX
Posts: 2,534
Likes: 0
Received 0 Likes
on
0 Posts
DUDE...you went WAY backwards on that one! Better get some air flow into that motor....not to mention fuel pressure upgrade...i have seen many a VP-44 fall to a Comp!!!! How many miles on your truck? Sweet spot for the VP-44 failure seems to be around 115,000-130,000 from what i have seen.....
Edit: 170,000....wow....be carefull if its the OE!!!
Edit: 170,000....wow....be carefull if its the OE!!!
#7
Registered User
Thread Starter
Join Date: Mar 2006
Location: NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
got the comp from a friend for 300 he orderd the wrong one so i got a deal. The inj pump is not oe and i have put the vulcan big line and relocatoin kit on. I have a bhaf that i can put on the truck but it is stupid loud. Sounds like it is trying to suck the fire wall in.
Trending Topics
#13
Registered User
Originally Posted by tempoffroad
Dan tell me what u think im new to this truck and motor just looking for help
tempoffroad! When Bombing these Trucks the First thing on your list of
things to do should be Gauges.
#15
Registered User
Thread Starter
Join Date: Mar 2006
Location: NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
well got the comp installed today and wow what a difference on level one didnt tap the wire but did put a bhaf on it with the silincer ring still installed and wasnt that loud. cant wait to get the boost and egt installed so that i can tap the pump.