gt40r
#1
Registered User
Thread Starter
Join Date: Dec 2004
Location: oxnard, ca
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
gt40r
i am want to know if anyone has used one or has any info on this charger . i know that theres alot of talk about the gt37r stages . now one seems to really talk about this one .
#3
Registered User
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
http://www.turbobygarrett.com/turbob...40/GT4088R.htm
You'd need an apaptor or new exhaust manifold to run it. T-4 flange.
They list it as a 700 hp turbo- a bit big for ya methinks.
You'd need an apaptor or new exhaust manifold to run it. T-4 flange.
They list it as a 700 hp turbo- a bit big for ya methinks.
#4
Registered User
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered User
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
The horsepower ratings garrett has on their website are usually ratings for gas powered vehicles.
The GT40 is more like a 500hp turbo.
A GT42 is more along the lines of a 600-700hp turbo on a diesel.
The GT40 is more like a 500hp turbo.
A GT42 is more along the lines of a 600-700hp turbo on a diesel.
#6
Registered User
Thread Starter
Join Date: Dec 2004
Location: oxnard, ca
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
yeah the gt42 is more than im after . yeah i would guess the gt40 should support some were in the 500hp range . the set up other than that would be a comp or drag and a set of 150hp sticks . and a built auto .
Trending Topics
#8
Registered User
Join Date: Sep 2003
Location: stupid ohio
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
The general rule of thumb when converting gasser HP turbo ratings is to multiply the gas rating by ~70% to get the diesel rating. Gasser rated 700hp 'charger flows ~70lb/min and this charger should support 450-500HP on a diesel.
For reference, a stock HX35 @ 21psi @ 120F IAT @ 3200rpm @ 350HP is producing roughly 55.36700035 lb/min.
brandon.
For reference, a stock HX35 @ 21psi @ 120F IAT @ 3200rpm @ 350HP is producing roughly 55.36700035 lb/min.
brandon.