Got your cristal ball out? Experts give me a HP guess........
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
Got your cristal ball out? Experts give me a HP guess........
I know I know its asked alot. But look at my sig, what do you think it'll pull on a dynojet 248x. I'm going to run it in a few weeks, but wanted to see what the experts have to say.
the hx40 over ht3b pushes a solid 50psi. HRVP has never had a wore tap and still doesn't.........until the adrenalin beta box arrives that is. but I'm sure it waon't be before I dyno.
the hx40 over ht3b pushes a solid 50psi. HRVP has never had a wore tap and still doesn't.........until the adrenalin beta box arrives that is. but I'm sure it waon't be before I dyno.
#4
#5
Registered User
Join Date: Jan 2005
Location: ALBUQUERQUE
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
with the quad box and the competition files that are supposed to be coming out i wouldnt be suprised to see you hit 600, the HRVP is what im not sure of, SO would probably net more HP
Trending Topics
#8
Registered User
Thread Starter
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
awesome awesome awesome {insert giddy little schoolgirl voice}
I might be able to borrow a set of DDP injectors that are in the grossly big catagory for the dyno too, from a very nice man up the road. I'm thinking that the jammers would be a holdback point. If it really works I'll have to rebuild my ht4c or try to hybrid the 3b and 4c based on what the boost vs egt says with uber fuel.
I might be able to borrow a set of DDP injectors that are in the grossly big catagory for the dyno too, from a very nice man up the road. I'm thinking that the jammers would be a holdback point. If it really works I'll have to rebuild my ht4c or try to hybrid the 3b and 4c based on what the boost vs egt says with uber fuel.
#11
Registered User
Had a busy summer, started a side company cutting grass at industrial sites. Rolled the Jeep in May right after getting back from Moab, that sucked. Getting ready to build up a Grand Cherokee. I did out a DTT TC and VB in before going to Moab. Pulled the jeep and trailer there an back at 85mph most of the way. Got everything stuck in the wife's uncle's driveway in Wyoming due to a snowstrom, 3 days later we were sweating in 38C weather in Moab.
Your rig has sure come a long way, thought you were going to P pump it?
Whats happening on the 10th? Been outta the loop....
Your rig has sure come a long way, thought you were going to P pump it?
Whats happening on the 10th? Been outta the loop....
#13
Registered User
Thread Starter
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
clay dyno GTG on Nov 10th At AFI performance in Edmonton. gonna be 15-20 rings on the rollers and some watchers. lunch should be a good time.
was gonna p-pump but got wind of the Quad Adrenalin race box and changed mind.
was gonna p-pump but got wind of the Quad Adrenalin race box and changed mind.
#15
Registered User
Thread Starter
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
oh I forgot about that. ok count me out of that one. I'm just really friggin antsy to see if I've got a legitimate shot to get into the deep 600s by guaging what I got to what a wire tapper will add