fuel pressure gauge
#17
IS it 1/4 inch plastic tubing as well of 1/4 rubber line with the 1/8 inch inside??
upersleder, 1/8 hydraulic hose? Looking at one of these 2 ways. No problem with running diesel directly to the gage? No compatability issues? FP is my last gage, so really looking to get one SOON!!
upersleder, 1/8 hydraulic hose? Looking at one of these 2 ways. No problem with running diesel directly to the gage? No compatability issues? FP is my last gage, so really looking to get one SOON!!
#18
Registered User
Join Date: Apr 2004
Location: New Meadows, Idaho
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
My guages are on there way... I think...
But I did NOT order the Isolator for it... I'm going to plumb straight to the gauge. Also going to add a needle valve so I can turn it off if I have to if the line leaks. But from all the people that have do this have never said anything about leaks or fire problems...
But I did NOT order the Isolator for it... I'm going to plumb straight to the gauge. Also going to add a needle valve so I can turn it off if I have to if the line leaks. But from all the people that have do this have never said anything about leaks or fire problems...
#19
Registered User
Originally posted by RenegadeT
Good thinking, I'm preparing to install my gauges, I think I'll get some 1/4" for the fuel and boost. You didnt terminate the 1/4", just butt it into the 1/8" compression fitting? Maybe a few wraps of electrical tape or some heat shrink tube?
The line to my mech. oil pressure gauge in my Jeep leaked on my passengers foot. I thought it was pretty funny, but he didnt see it that way
Good thinking, I'm preparing to install my gauges, I think I'll get some 1/4" for the fuel and boost. You didnt terminate the 1/4", just butt it into the 1/8" compression fitting? Maybe a few wraps of electrical tape or some heat shrink tube?
The line to my mech. oil pressure gauge in my Jeep leaked on my passengers foot. I thought it was pretty funny, but he didnt see it that way
#20
Registered User
Join Date: Jun 2004
Location: U.P. Mi.
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
mine was 1/4" hyd. hose with 1/8"NPT ends on both sides, i couldnt find a needle valve and was in a hurry, and others suggested a rubber line inbetween, so i used a tecumseh fuel valve for a snowblower to act as my needle valve, hooked a rubber line to it and then to the hyd. line into the cab, i wanted SS braided line but could not find any. its working so far, i havent gotten the pod i want yet, we'll see how it goes when i do. i found a racer site, you can order SS brake line, thats probably what i will end up with in the future.
Thread
Thread Starter
Forum
Replies
Last Post
dodgeguy71
Performance and Accessories 2nd gen only
17
01-19-2012 12:52 AM
Igor
3rd Gen High Performance and Accessories (5.9L Only)
7
09-13-2005 12:47 AM
Greeds22
Performance and Accessories 2nd gen only
25
09-11-2005 03:13 PM
engcogod
Performance and Accessories 2nd gen only
17
02-03-2005 08:49 PM
Patriot_RAM
3rd Gen High Performance and Accessories (5.9L Only)
10
10-08-2004 06:10 PM