Fuel Pressure Gage Question
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Wisconsin
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Pressure Gage Question
I just finished installing a Isspro Mech fpg today, something I haven't found mentioned is how quickly do these gages respond ?
I'm off the VP test port with an adaptor from Ginos, hooked to 1/4 braided stainless with a needle valve in between (open 1 turn)
At startup/idle it took a couple of minutes to reach 13psi, that appears to be max, I tried WOT, but I hit triple digits (for the first and only time!!) still accellerating with no end in sight, it pulled down to 9psi, but real slow, my shield of invincibility isn't as thick as it used to be and I ran out of straight road so I had to slow down.
Do these things all respond like molasis or do I have a problem ?
Thanks for any input.
I'm off the VP test port with an adaptor from Ginos, hooked to 1/4 braided stainless with a needle valve in between (open 1 turn)
At startup/idle it took a couple of minutes to reach 13psi, that appears to be max, I tried WOT, but I hit triple digits (for the first and only time!!) still accellerating with no end in sight, it pulled down to 9psi, but real slow, my shield of invincibility isn't as thick as it used to be and I ran out of straight road so I had to slow down.
Do these things all respond like molasis or do I have a problem ?
Thanks for any input.
Thread
Thread Starter
Forum
Replies
Last Post
Mexstan
3rd Gen High Performance and Accessories (5.9L Only)
7
04-07-2006 07:40 PM
windkid4
Performance and Accessories 2nd gen only
3
08-31-2005 09:44 AM
NavyChief
Performance and Accessories 2nd gen only
10
05-23-2005 09:44 AM