fuel plates
#1
Chapter President
Thread Starter
Join Date: Feb 2003
Location: Independence, MO
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
fuel plates
How are the fuel plates #'s (example- #10 plate) set up ? Will a #0 produce more power than a #10 -for eample? Also how hard are they to install? Any special tools needed?
#2
Registered User
Join Date: Aug 2002
Location: Downey, CA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Re:fuel plates
A "0" plate is the highest except for the Piers Mystery plate the #4 is next you will need the 4,000 gov. springs and more than a stock turbo to use any of these plates. At the present I am running a Piers stupid pump with a stock 180 plate and am well over 500HP.
#3
Registered User
Join Date: Aug 2002
Location: Enid, OK
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered User
Join Date: Aug 2002
Location: Enid, OK
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Re:fuel plates
Here are the instructions: http://www.tstproducts.com/power_install.html<br><br>My breakoff screw was a real pain to get out, finally had to just chisel the head off.
Thread
Thread Starter
Forum
Replies
Last Post
Cummins mann
Performance and Accessories 2nd gen only
7
05-18-2003 01:49 AM