Which FP guage to get
#1
Chapter President
Thread Starter
Which FP guage to get
I noticed on the Genos garage site they list the mechanical guage and the electrical. which one is the preferred one. i want to mount it in one of those steering pod guage mounts.
thanks for the input.
scotte
thanks for the input.
scotte
#2
Banned
Join Date: May 2003
Location: Nashvile Tennessee
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
scottsjeeprolet,
It just depends on you and your preference etc. In the past some of the electric ones were less the reliable, the new Auto Meters have been great for us and the customers like them too. Some folks just prefer the mechanical etc. You should add an isolator in any mechanical gauge install, lots of folks don't but it's the safest way etc. By the time you add up the parts for the mechanical and compare to the electric and it's easy install as compared the overall cost is pretty equal. Call us if you want we sell both everyday and will be glad to help you with any questions etc.
Mark @ DPPI
It just depends on you and your preference etc. In the past some of the electric ones were less the reliable, the new Auto Meters have been great for us and the customers like them too. Some folks just prefer the mechanical etc. You should add an isolator in any mechanical gauge install, lots of folks don't but it's the safest way etc. By the time you add up the parts for the mechanical and compare to the electric and it's easy install as compared the overall cost is pretty equal. Call us if you want we sell both everyday and will be glad to help you with any questions etc.
Mark @ DPPI
#3
Registered User
Join Date: Apr 2004
Location: New Meadows, Idaho
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
scottsjeeprolet
I got a set of DiPricol's from Mark @ DPPI. They will run you about $300 for the full set of pyro, fuel pressure, boost. Also I see that you auto trans so your going to want to get a trans temp too. A picture of my A-pillar pod is in my signature.
I would seriously get the full setup since your running a box now.
I got a set of DiPricol's from Mark @ DPPI. They will run you about $300 for the full set of pyro, fuel pressure, boost. Also I see that you auto trans so your going to want to get a trans temp too. A picture of my A-pillar pod is in my signature.
Originally Posted by scottsjeeprolet
Edge EZ WOW what a difference, gotta get guages now.
Thread
Thread Starter
Forum
Replies
Last Post
Bradleysram
Performance and Accessories 2nd gen only
19
05-12-2009 08:36 AM
bigragu
1st Gen. Ram - All Topics
4
01-24-2006 11:16 AM
hunterrj
3rd Gen High Performance and Accessories (5.9L Only)
4
08-04-2005 09:27 PM
lucey
3rd Gen High Performance and Accessories (5.9L Only)
24
04-15-2004 06:54 PM