FASS SYSTEM or HOLLEY BLUE ????
#16
Registered User
Join Date: Mar 2006
Location: Fort Collins, CO
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
I just installed a Holley Blue on my truck in addition to a newer stock LP...I see 26 PSI @ idle and can't pull it down below 18 PSI @ WOT. It wasn't too hard to install..the hardest part was getting the new lines/fittings into place. It runs great so far and I think it works great for the $200ish that I paid for it and the lines.
That being said, if I had the money to do the FASS system I would have, and I will probably upgrade to it in the future.
That being said, if I had the money to do the FASS system I would have, and I will probably upgrade to it in the future.
#18
Registered User
Join Date: Dec 2006
Location: New Jersey
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Hello I am runing the pf-100 system from pureflow technologies. I to looked at all other systems and found this pf-100 to be the best and have been very pleased with it. It runs about 17psi and realy has not dropped below 15psi. I have installed a fass systen in a friends truck and found the air dog pf-100 to be much better made. The install was easer with the air dog system too. The fass systm is a spin off of the air dog which was the first system on the market. Good luck and i hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
AlCorr
3rd Gen Engine and Drivetrain -> 2003-2007
114
02-11-2009 02:32 AM
Coaldigger
24 Valve Engine and Drivetrain
17
08-04-2008 10:40 PM
Texaschevelle
Performance and Accessories 2nd gen only
26
11-16-2007 08:08 PM
rockittboy
3rd Gen High Performance and Accessories (5.9L Only)
8
10-22-2006 12:36 PM