Face lift, what do you guys think?
#1
Face lift, what do you guys think?
Here are a few before & after. Its been about a year in the works. So far I'v
Debadged the truck
Paint
Wheels/tires
Lightly built trans Billet single disc TC and some other billet goodies
Built my bumper
Built the rear rack system
Raptor100 gph
4" turbo back
Edge comp
Next I'm going to build a burly radius arm front end.
Debadged the truck
Paint
Wheels/tires
Lightly built trans Billet single disc TC and some other billet goodies
Built my bumper
Built the rear rack system
Raptor100 gph
4" turbo back
Edge comp
Next I'm going to build a burly radius arm front end.
Trending Topics
#8
Very, very clean look. Well done. My question is where did you get the grill? It is basically the same grill that I have on my 99 2500 4wd but stripped of the chrome and painted black. Exactly what I want. More to the point this almost exactly the blue print I laid out over a month ago for what I wanted to do with my truck's exterior. Same grill, roughly the same bumper, but with a winch mounted inside, line-x running boards so no more worries about rock chips and branch scrapes, black steel wheels and up on 35s for improved ability to deal with off road obstacles, stumps, rocks etc. The only difference in design is on mine I will be running the matte black Bushwacker fender flares. Again great clean job.
Last edited by City Rat; 03-24-2016 at 10:24 AM. Reason: Fix spelling errors and give a better explanation.
#9
Check out fleabay, just saw one for 46 bucks.
#10
Looks like one to me as well, that's why I asked where the OP got it. Yeah, I hear ya on ebay. I have checked there and keep running into fine print along the lines of this fits your truck unless it came from the factory with a chrome grill in which case it won't fit as the brackets are different.
#12
If you find a part number in your book for a black grill that will fit my 99 2500 4wd, diesel longbed, I would be grateful if you could pass it on. Thanks.
#13
Thread
Thread Starter
Forum
Replies
Last Post
DixieMfg
3rd Generation Ram - Non Drivetrain - All Years
7
07-02-2007 02:32 PM