Anyone feel like discussing them?<br><br>I've had a set of &quot;Mach IV's&quot; from Don M for a lil while. So these will NOT smoke less then extrude hone injectors due to the size. However since the day they went in it has been extremely cold and snowing every other day (or slick out) so I haven't been able to play higher levels as much as I would like. These are my daily drivers, and I can now make smoke on injectors only...granted not alot but still visable. With my camshaft, 4.10 gear, and small turbo housing it was very hard for me to get the DDIII's or BD IV's to smoke box off. So I know they are adding the fuel. Idle sound has changed slightly. EGT's box off won't go over 1100&amp;deg; and around 38 to 39psi. Level II on COMP=1200&amp;deg; Level IV on COMP=1350&amp;deg; Level V approaches 1600&amp;deg;, but with my small exhaust housing I expect it to be up there. I haven't been able to get boost peaks lately because by then I am doing 90+ and the road conditions hhaven't been favorable.<br><br>All I can say is I am very happy with how they turned out. However people in colder climates, if you go this big for dailys you might not like them due to the fact you'll have to use light throttle around town or you spin. So far the coldest I have started with them has breen around 5&amp;deg;.

 

Kat, Do you or Don know who is producing injectors in the Pocatello Id ?<br><br>Thanks,<br><br>I dont have Don's email addy

 

What exactly are EDM injectors?<br><br>Mike

 

[quote author=Marine link=board=7;threadid=10249;start=0#98035 date=1043882985]<br>What exactly are EDM injectors?<br><br>Mike <br>[/quote]<br><br>Check out this thread<br>http://www.nwbombers.com/board/ikonb...=ST;f=3;t=1662<br><br>Don explains the process.<br><br>Bob W.<br><br>Where did you hear someone in Pocy was making injectors? Just curious?

 

[quote author=Bob Wagner link=board=7;threadid=10249;start=0#98006 date=1043879282]<br>Kat, Do you or Don know who is producing injectors in the Pocatello Id ?<br><br>Thanks,<br><br>I dont have Don's email addy<br>[/quote]<br><br>Sorry I do know know who is making injectors up there.<br><br>Don M email :Don M

 

[quote author=Marine link=board=7;threadid=10249;start=0#98035 date=1043882985]
What exactly are EDM injectors?[/quote]

The EDM stands for electrical discharge machining.

They are made different from extrude honed injectors which basically has media shoved through it to enlarge the holes. Go read the suggested thread and if you have more questions then ask

 

Bob,<br><br>Maybe its BullyDog? The are in the Poky area. I actually lived there 3 years ago myself. <br><br>I have spoken to BullyDog about them last summer. Perhaps they are giving the idea a go themselves now? <br><br>Who knows, maybe before long on every street corner or convenience store guys will be able to pick some up :<br><br>Don~<br><br>

 

[quote author=Don M link=board=7;threadid=10249;start=0#98295 date=1043937753]<br>Bob,<br><br>Who knows, maybe before long on every street corner or convenience store guys will be able to pick some up :<br><br>Don~<br><br><br>[/quote]<br><br><br>Thats a good one Don, boy I thought this thread would get more responses than this ???<br><br>

 

What about a set for a 12v????? I had thought about a set of the 370's..but I think I will wait and see what Don comes up with for the 12v crowd.<br> <br>Rick

 

Once these things get on the market, people are going to realize how good they really are and I think we will be seeing quite a few good posts on Don's injectors. I am of course speaking from first hand experience. No word of mouth. I have run several different combinations of Don's injectors and the power comes on quite a bit faster than the DD injectors. The smoke is there but not near as much as one would expect with the amount of fuel that they flow. It is very contollable with your box. ;D ;D<br><br>MikeD

 

I think everyone (me included) is waiting to hear from the people that are running them. I sent Don an email today asking for some info. The -sensored- go on in two weeks, so I will be looking for some more fuel.

 

How many miles do you have on a set of EDM's? Any idea what the failure rate will be?

 

They should last about a week. Not too bad when one considers they cost upwards of 50 grand a set. Of course there is also a 10 grand core charge if you want to keep your old ones.<br><br>LMAO<br><br>Don~

 

Maybe you need to call them &quot;Super Big Gulps&quot;

 

Dang Don your cracking me up! <br><br>I'll be down there 19-21 Feb, I'll leave friday afternoon. We will stay over by Love Field at I-35 and NW Expressway.<br><br>Jim