RAMTECH

How bout some discussion on the advantages (or disadvantages) of the Juice w/attitude over a more traditional setup, like the SMARTY with Guages. Are there any siginificant differences?? Is it just personal preference? I tend to think I would like having the A-pillar guages but it seems the juice is much cheaper. Any differences in installation difficulty? Longevity?? Accuracy?

Any thoughts??

Dodgin&Rammin

Thanks mooseman. I ordered the juice today. I can't wait! Some smoke would be good. You can't even hardly notice any smoke on my 01. My stage 5 jammer nozzles are coming this week They should change that I hope.

mooseman

You'll love it.
If your installing it on an auto make sure to call Edge before you install the trans temp sensor. They have changed locations. The previous location shown in the instructions on the front pass. side of the trans is not a good one. It could interfere with an internal spring.

Mooseman

Dodgin&Rammin

Good to know I'll find out I should've overnighted the stuff. I'm to impatient knowing its paid for but I don't have it yet.

Sea01Cummer

I love my juice with attitude, there is no way i would go back to a comp. I think the power comes on smoother than the comp. I love all the features this thing has, i havent had time to dink with the 0-60 time deal. I do get more smoke than i would like on the 1 setting and i have the sub level turned down, i guess it is because of the sticks.

Steve

whiteVLX

I'm guessing the smoke on level 1 is due to the sticks, I have stock injectors and run leve; 1 with the default sub level 3. I don't notice any smoke with these settings

whiteVLX

The beta test instructions show to install it in the rear port on the trans. I have mine installed there with no problems, so far. As I understand the front port install "will" cause some sort of interference between the internals and the sensor. I never got a set of instructions for the production model though so I'd be interested in seeing where Edge is now proposing to install the connection.

Fred Swanson

None of the test ports are an ideal location. Put it in the pan, or the cooler line to get the best reading.