Dyno Run
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Springdale, WA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Run
I finally made a dyno run and was wonderin what you guys thought of my numbers and if they seem to be where they should. I made 410 hp and 996.55 lb/ft of torque. Oh and that smoke looked good rollin from the 8 inch single stack. When i get a new scanner i will post the graphs.
#2
I don't care about the graphs but please post a pic or two of the stack! Is it a miter cut? How tall? lol
Those are nice numbers though! What were your EGT's like and I assume your running the stock HX35 still right?
Those are nice numbers though! What were your EGT's like and I assume your running the stock HX35 still right?
#4
Registered User
Thread Starter
Join Date: Dec 2006
Location: Springdale, WA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
ya it is still the hx 35 but it has been persuaded to hit 48 lbs when it needs too. no the stack is not miter it is flat top i will try to posts some pics tonight.
#5
Registered User
Join Date: Dec 2005
Location: bolton,CT
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
nice numbers especially the torque thats nasty torque. i made 253rwhp and 561rwtq with a slipping stock tranny, and whats in my sig minus the 4" exhuast i had my 3" straight piped. looks like timing and those new era 370's and not slipping make a big difference. next time i dyno i plan to have new era 435's and a torque converter/heavy duty rebuild and a valve body and 3kgsk and piers custom delivery valves so i think i should be a little 1000 rwtq and easily 400rwhp with a stock turbo. if its not too hot, im also gonna have a piers valet switch in so its not so toasty with the stock turbo that will be crying for help.
#6
Registered User
Thread Starter
Join Date: Dec 2006
Location: Springdale, WA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Ya the EGT's were a little warm The truck made 44 lbs of boost on the dyno it has hit 48-50 on the highway. I am going outside right now to take pics of the stack Muddin Dude so i will have some pics posted in a few. Hopefully!
Thread
Thread Starter
Forum
Replies
Last Post
ppsi
3rd Gen High Performance and Accessories (5.9L Only)
13
04-13-2004 03:49 PM