DTT Transmissions?
#16
Registered User
I have the billet input and stock intermediate and output shafts. I talked to a guy that drag races a CTD and he says anything over 16psi for a launch has snapped a shaft (cant remember which).
I know the stock intermediate and output is good to 600hp anyhow, since thats what I told my builder Im shooting for and he recommended I leave those two in. Im not going to be launching like that though.. yikes!
I know the stock intermediate and output is good to 600hp anyhow, since thats what I told my builder Im shooting for and he recommended I leave those two in. Im not going to be launching like that though.. yikes!
#17
Registered User
Join Date: Dec 2003
Location: weston,wv
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
i have full dtt with billet input and stock inter and output ...
when i did mine i thought i'd leave the output stock to act like a shear pin ...
it's the easiest to replace ... got one for free from a local junkyard just in case ...
haven't broke anything at 50k miles and 500 hp ...
dozens of burnouts and one fried dana 70 later and the dtt has been flawless ...
when i did mine i thought i'd leave the output stock to act like a shear pin ...
it's the easiest to replace ... got one for free from a local junkyard just in case ...
haven't broke anything at 50k miles and 500 hp ...
dozens of burnouts and one fried dana 70 later and the dtt has been flawless ...
#19
Registered User
Join Date: Mar 2004
Location: Walden, NY
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
#20
Registered User
Join Date: Sep 2003
Location: stupid ohio
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
Something happened in my stock intermediate:
The builder said something about me making a special 'two-piece' version of my intermediate shaft when I launched at 20psi on nitrous. I'm convinced the torque from the nitrous took it out.
Tim Barber stood behind the entire transmission - billet aluminum flexplate to billet output without complaining.
brandon.
The builder said something about me making a special 'two-piece' version of my intermediate shaft when I launched at 20psi on nitrous. I'm convinced the torque from the nitrous took it out.
Tim Barber stood behind the entire transmission - billet aluminum flexplate to billet output without complaining.
brandon.
#24
Registered User
Join Date: Mar 2006
Location: Eastern Shore of Maryland
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
#27
Registered User
Join Date: Mar 2004
Location: Walden, NY
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
#29
Registered User
#30
Registered User
Oh, welded 1st gear= lotta heat by slipping plates not redneck fix to make it stay put. Few years back I welded the spider gears together on my Datsun Rally Truck for full time posi.