Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Door Speakers

Thread Tools
 
Search this Thread
 
Old 03-05-2007, 10:51 AM
  #1  
Chapter President
Thread Starter
 
haloman's Avatar
 
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes on 0 Posts
Door Speakers

Hey guys/gals,

I am starting on the audio in my 01' and I am going to start with the door speakers. I need to know what sizes fit well and without major modification. I am looking at component sets and mounting the tweeter somewhere since I don't have the stock infinity system. The plan is to run them off my H/U power for now and add a 4-channel amp later. So what brands fit well with the shallow doors? I was looking at Pioneer Premiers and Infinity Reference Series speakers but I am open to other suggestions. I am going to use the H/U from my 91' (JVC) and if 6x9's can fit anywhere that would be great so I don't have to buy other sizes that would be great.

TIA
Old 03-05-2007, 03:10 PM
  #2  
Registered User
 
JLand's Avatar
 
Join Date: May 2005
Location: Rogers, Arkansas
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
People will say that 6x9's don't fit in the front doors. However, a lot of them do. I bought into what Crutchfield said would fit and bought 5 1/4" componants for the front doors with the tweeter mounted in the lower hole of a 3 guage piller pod. While I was putting them in, I test fit my pioneer 3-way 6x9's and they fit in the factory 6x9 front door spot just fine with no window interference. They sounded a .... of a lot better too. Just get an average to below average depth 6x9 and try it.

The rear doors are 6 1/2 and won't fit a 6x9 without cutting.
Old 03-05-2007, 03:56 PM
  #3  
Registered User
 
Eradan's Avatar
 
Join Date: Feb 2006
Location: Mesa, Arizona
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
This post doesn't belong in performance ..

But i'll respond anyway's ... i just swapped out w/ a new set of infinity 1913's ... and they fit ok ... had to modify the panel slightly .... It's incredible how much better they sound than that stock infinities (even before they were blown).
Old 03-05-2007, 04:13 PM
  #4  
Registered User
 
rollinsmoke's Avatar
 
Join Date: Sep 2006
Location: INDIANA
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts
Sure it does, he's makin performance upgrades to his stereo.
Old 03-05-2007, 04:14 PM
  #5  
Chapter President
Thread Starter
 
haloman's Avatar
 
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Eradan
This post doesn't belong in performance ..

But i'll respond anyway's ... i just swapped out w/ a new set of infinity 1913's ... and they fit ok ... had to modify the panel slightly .... It's incredible how much better they sound than that stock infinities (even before they were blown).
It wouldn't belong if it was just performance but its performance and accessories so it fits right in. Thanks for the reply tho.
Old 03-05-2007, 04:56 PM
  #6  
Registered User
 
Eradan's Avatar
 
Join Date: Feb 2006
Location: Mesa, Arizona
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rollinsmoke
Sure it does, he's makin performance upgrades to his stereo.
Love it ! ... i'll buy.

yah ... so i got the 1913's ... which are retail 249 at BB for 99 since they are last years models ... and only pushing them w/ a 50w deck and they sound AWESOME ... the stock 2ohm infinity system just SUCKS imo
Old 03-05-2007, 07:00 PM
  #7  
Registered User
 
slim51015's Avatar
 
Join Date: Oct 2003
Location: NE Pa.
Posts: 338
Likes: 0
Received 0 Likes on 0 Posts
STANDARD
The standard equipment speaker system includes
speakers in four locations. One full-range 15.2 by
22.9 centimeter (6.0 by 9.0 inch) speaker is located in
each front door. There is also one full-range 13.3 centimeter
(5.25 inch) diameter speaker located in each
rear cab side panel for the standard cab and the club
cab models, or in each rear door of the quad cab models.

From the 01 manual.
Old 03-05-2007, 07:08 PM
  #8  
Registered User
 
j-dubya's Avatar
 
Join Date: Sep 2005
Location: acworth, ga / camp lejeune, nc
Posts: 183
Likes: 0
Received 0 Likes on 0 Posts
i like my pioneer 6x9's, and they fit fine. every 6x9 pioneer, and most others for that matter, will fit right into the doors.

jeremy
Old 03-05-2007, 07:16 PM
  #9  
Banned
 
aggiehorsepower's Avatar
 
Join Date: Apr 2006
Posts: 210
Likes: 0
Received 0 Likes on 0 Posts
i got some 6x9's in my door. They fit but you can only use 2 of the screw to mount them
Old 03-05-2007, 07:22 PM
  #10  
Registered User
 
j-dubya's Avatar
 
Join Date: Sep 2005
Location: acworth, ga / camp lejeune, nc
Posts: 183
Likes: 0
Received 0 Likes on 0 Posts
i got all four in mine...
Old 03-05-2007, 07:47 PM
  #11  
Banned
 
Munchies's Avatar
 
Join Date: Apr 2006
Posts: 112
Likes: 0
Received 0 Likes on 0 Posts
WHat size are the factory tweeters in the pillars?
Old 03-05-2007, 08:54 PM
  #12  
Banned
 
TheBigNasty's Avatar
 
Join Date: Feb 2006
Location: Central "By God" Texas
Posts: 1,048
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by j-dubya
i like my pioneer 6x9's, and they fit fine. every 6x9 pioneer, and most others for that matter, will fit right into the doors.

jeremy
I would not count on that bud. I have 4 way Pioneer 6x9's in my door and they are too deep unless you use a spacer. You can make them work by just using 2 of the screws but it still rests against the window track.
Old 03-05-2007, 09:36 PM
  #13  
Chapter President
Thread Starter
 
haloman's Avatar
 
Join Date: May 2002
Posts: 3,529
Likes: 0
Received 0 Likes on 0 Posts
Well thats good to know the 6x9's will fit as I have 4 pioneer 6x9s in the 91' that I will take out. Now two of them are the Pioneer Premier (yellow ones) and they are the nicest ones and they barely fit in the doors if the 91'. Think that those will fit in the 01'? What kinda spacer are you talking about?
Old 03-05-2007, 10:07 PM
  #14  
Banned
 
TheBigNasty's Avatar
 
Join Date: Feb 2006
Location: Central "By God" Texas
Posts: 1,048
Likes: 0
Received 0 Likes on 0 Posts
It is just a ring the goes inbetween the basket of the speaker and the door, 1/4 to 1/2 inch thick. Real easy to make if you can't find them. I had some that a friend gave to me but misplaced them, so I still have mine held in by 2 screws.
Old 03-06-2007, 12:00 AM
  #15  
Registered User
 
tollboothrichie's Avatar
 
Join Date: Jan 2007
Location: N.W. Washington state
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
kicker 6x9's in the front and kicker 5.25's in the suicide doors, sound great, fit great. cardomain.com or crutchfield.com will tell ya what fits and what doesn't. Use crutchfield's foam speaker baffles and a sheet of dynamat for each speaker and make sure to buy some extra panel clips before you start! my $0.02


Quick Reply: Door Speakers



All times are GMT -5. The time now is 05:31 AM.