Doh! Input shaft let go last night....
#1
Registered User
Thread Starter
Join Date: May 2003
Location: The 951-Flatbill center of the universe
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Doh! Input shaft let go last night....
Dave Goerend is overnighting me a new shaft, hub, front pump, VB, and an intermediate section just in case. He's also sending his personal slide hammers so I can get it back up and running by Monday.
He offered first off to send me a complete trans, then to have one of his dealers drive 3 hours to fix it for me. The R&R was my idea, he's gonna walk me through it.
They say the trans is only as good as the man that stands behind it.....guess I got my answer.
I would have expected nothing less from Dave, he's top notch.
He offered first off to send me a complete trans, then to have one of his dealers drive 3 hours to fix it for me. The R&R was my idea, he's gonna walk me through it.
They say the trans is only as good as the man that stands behind it.....guess I got my answer.
I would have expected nothing less from Dave, he's top notch.
#3
Registered User
Thread Starter
Join Date: May 2003
Location: The 951-Flatbill center of the universe
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Stock shaft......wasn't launching or power braking. Apparently it had just decided it had enough.....
I'll know more when I get it out.
I'll know more when I get it out.
Trending Topics
#9
Registered User
Thread Starter
Join Date: May 2003
Location: The 951-Flatbill center of the universe
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Turns out I stripped the splines off at the hub.
Parts showed up yesterday, just like Dave said they would. New input shaft, hub, front pump, intermediate shaft (just in case) and a new triple disc TC, along with Dave's personal Snap On slide hammers. He also sent a complete gasket set, direct clutch spring and an overhaul manual.
Dave called me at about six times today to make sure everything was going right. He spent about 2 hours on his cell phone, from his nephew's wedding reception, walking me through the R&R on the front section.
I no longer fear the inside of the trans.....Dave taught me a lot today. His customer service is beyond description
Parts showed up yesterday, just like Dave said they would. New input shaft, hub, front pump, intermediate shaft (just in case) and a new triple disc TC, along with Dave's personal Snap On slide hammers. He also sent a complete gasket set, direct clutch spring and an overhaul manual.
Dave called me at about six times today to make sure everything was going right. He spent about 2 hours on his cell phone, from his nephew's wedding reception, walking me through the R&R on the front section.
I no longer fear the inside of the trans.....Dave taught me a lot today. His customer service is beyond description
#11
Registered User
Join Date: Sep 2003
Location: Gilbert, Az
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like you had a good experience, if you dont mind about how much was it for a new input shaft? I have been dreading mine going and I have heard they are very pricey.
#12
Registered User
Thread Starter
Join Date: May 2003
Location: The 951-Flatbill center of the universe
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Absolutely nothing......Dave warranteed the whole thing.....
Got the truck back up and running today, trans works as well as it always has.
Got the truck back up and running today, trans works as well as it always has.
Thread
Thread Starter
Forum
Replies
Last Post
Red3quarter
Other
541
12-12-2009 11:12 PM
signature600
Performance and Accessories 2nd gen only
5
10-05-2005 01:43 PM