Cummins part number on downpipe?
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: beyond all borders
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Cummins part number on downpipe?
This question might not go anywhere, but I thought I'd give it a shot.
Anyone got a Cummins part number for a turbo downpipe or turn down elbow for the following application:
-- 1998 1/2 to 1999 5.9L ISB engine with manual transmission
-- elbow must have fitting/mounting for the approved Jacobs/Cummins/Mopar exhaust brake
Tried a number of Cummins dealerships in Salt Lake City, Las Vegas, Charlotte, Roanoke, Knoxville, Atlanta, etc., but no one seems to have the necessary books to find the part number. Geez, those guys -- they've always been helpful, but on this one, for some reason, they're lost. :-[
Thanks!
Anyone got a Cummins part number for a turbo downpipe or turn down elbow for the following application:
-- 1998 1/2 to 1999 5.9L ISB engine with manual transmission
-- elbow must have fitting/mounting for the approved Jacobs/Cummins/Mopar exhaust brake
Tried a number of Cummins dealerships in Salt Lake City, Las Vegas, Charlotte, Roanoke, Knoxville, Atlanta, etc., but no one seems to have the necessary books to find the part number. Geez, those guys -- they've always been helpful, but on this one, for some reason, they're lost. :-[
Thanks!
#2
Registered User
Join Date: Feb 2002
Location: Decatur Ala
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re:Cummins part number on downpipe?
#3
Registered User
Thread Starter
Join Date: Sep 2003
Location: beyond all borders
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re:Cummins part number on downpipe?
Tried it, Tim, thanks, we'll see what Jacobs says, if they answer.
How about if I rephrase the question, however -- is it possible to disassemble the Jacobs exhaust brake assembly from one exhaust turn-down elbow, and reassemble it in another? They come in the kit as an integral unit, and I've never seen one apart. Anyone done this?
How about if I rephrase the question, however -- is it possible to disassemble the Jacobs exhaust brake assembly from one exhaust turn-down elbow, and reassemble it in another? They come in the kit as an integral unit, and I've never seen one apart. Anyone done this?
Thread
Thread Starter
Forum
Replies
Last Post
77machomopar
1st Gen. Ram - All Topics
2
01-24-2008 05:30 AM
Chrisf
Performance and Accessories 2nd gen only
3
06-27-2003 07:27 AM