Chrome exhaust tip
12-11-2002 | 11:56 AM
#1
Thread Starter
Registered User
Joined: Apr 2002
Posts: 208
Likes: 0
From: Hebron, Ky.
Chrome exhaust tip
A guy I work with has a 99 2500 4x4, and he's got a chrome tip on his truck... I believe it is a clamp on style that goes over the original tip. I've asked him where he got it but he can't remember... anyone have any ideas????
12-11-2002 | 12:52 PM
#2
Registered User
Joined: Aug 2002
Posts: 1,395
Likes: 0
From: Flat Rock, MI
11-25-2003 | 09:46 PM
#3
Registered User
Joined: Nov 2003
Posts: 526
Likes: 10
From: Arizona
Re:Chrome exhaust tip
I work for a major truck builder, and I got a scrap chrome
stack and had a section cut off of it. Then I drilled three
1/4 " holes and tapped them,and used 1/4" bolts to secure it.
Worked out perfect with very little space around tailpipe. hope this helps.
stack and had a section cut off of it. Then I drilled three
1/4 " holes and tapped them,and used 1/4" bolts to secure it.
Worked out perfect with very little space around tailpipe. hope this helps.
11-26-2003 | 10:41 AM
#4
Registered User
Joined: Sep 2003
Posts: 219
Likes: 0
From: Kecksburg, PA
Re:Chrome exhaust tip
drafalske
I have the chrome slip on from genos garage also. it slides over your exhaust and doesn't need to be welded. THe slip interference fit is enough to hold it in place. I think it was $36 and mine looks great after 2 years.
-Jason
I have the chrome slip on from genos garage also. it slides over your exhaust and doesn't need to be welded. THe slip interference fit is enough to hold it in place. I think it was $36 and mine looks great after 2 years.
-Jason
11-26-2003 | 06:59 PM
#6
Banned
Joined: Dec 2002
Posts: 254
Likes: 1
From: Southern Oregon
Re:Chrome exhaust tip
www.sourceautomotive.biz Hes got anything/everything. Give em a call if you dont see it on the site.
Mark
Mark
Trending Topics
11-27-2003 | 11:31 AM
#8
Registered User
Joined: Jan 2003
Posts: 110
Likes: 0
From: Gig Harbor, WA
Re:Chrome exhaust tip
I just installed a stainless turn-down tip to keep the soot on the cars behind me vs. my quarter panel. 8) Rip hooked me up with it, and BigK did the expert welding. 
IMHO, stainless is the only way to go, and it is not that much more expensive than chrome...
IMHO, stainless is the only way to go, and it is not that much more expensive than chrome...
11-27-2003 | 12:44 PM
#9
Registered User
Joined: Jan 2003
Posts: 138
Likes: 0
From: Graham, Washington
Re:Chrome exhaust tip
[quote author=DEZLPWR link=board=4;threadid=8183;start=0#msg214875 date=1069950670]
I just installed a stainless turn-down tip to keep the soot on the cars behind me vs. my quarter panel. 8) Rip hooked me up with it, and BigK did the expert welding. IMHO, stainless is the only way to go, and it is not that much more expensive than chrome...
[/quote]
Who did the expert cutting off of your old tip? :
I just installed a stainless turn-down tip to keep the soot on the cars behind me vs. my quarter panel. 8) Rip hooked me up with it, and BigK did the expert welding.
IMHO, stainless is the only way to go, and it is not that much more expensive than chrome... [/quote]
Who did the expert cutting off of your old tip? :
11-28-2003 | 12:20 AM
#10
Registered User
Joined: Jan 2003
Posts: 110
Likes: 0
From: Gig Harbor, WA
Re:Chrome exhaust tip
[quote author=NAIL BENDER link=board=4;threadid=8183;start=0#msg214917 date=1069955091]
[quote author=DEZLPWR link=board=4;threadid=8183;start=0#msg214875 date=1069950670]
I just installed a stainless turn-down tip to keep the soot on the cars behind me vs. my quarter panel. 8) Rip hooked me up with it, and BigK did the expert welding. IMHO, stainless is the only way to go, and it is not that much more expensive than chrome...
[/quote]
Who did the expert cutting off of your old tip? :
[/quote]
ummmm, oh yeah, that would be you... I am still trying to get over my fear of the sawzall. 
[quote author=DEZLPWR link=board=4;threadid=8183;start=0#msg214875 date=1069950670]
I just installed a stainless turn-down tip to keep the soot on the cars behind me vs. my quarter panel. 8) Rip hooked me up with it, and BigK did the expert welding.
IMHO, stainless is the only way to go, and it is not that much more expensive than chrome... [/quote]
Who did the expert cutting off of your old tip? :
[/quote]
ummmm, oh yeah, that would be you...
I am still trying to get over my fear of the sawzall.
Thread
Thread Starter
Forum
Replies
Last Post
bigsam
3rd Generation Ram - Non Drivetrain - All Years
16
01-30-2007 08:54 PM
StrokeThisCTD
3rd Gen High Performance and Accessories (5.9L Only)
5
11-25-2004 01:44 AM
Blessed
3rd Gen High Performance and Accessories (5.9L Only)
4
12-04-2003 08:12 AM