Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Chips with built in vp44 protection

Thread Tools
 
Search this Thread
 
Old 12-05-2006 | 10:09 AM
  #1  
Codyboy's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 39
Likes: 0
Chips with built in vp44 protection

I am looking for a chip like the edge w/ attitude but for a bit less money. Is there any other chips out there that moniter fuel pressure, EGT and boost?
Old 12-05-2006 | 10:22 AM
  #2  
getblown5.9's Avatar
Banned
 
Joined: Jan 2005
Posts: 2,997
Likes: 0
From: Baltimore, MD
not gonna find anything for less money, but you could combine a quad commander with any number of aftermarket boxes (it can control many brands or box/tuner and has those guages built in) but again its not going to be cheaper
Old 12-05-2006 | 10:32 AM
  #3  
Codyboy's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 39
Likes: 0
yea looks like ill have to wait for the edge.

I am mostly worried about fuel pressure right now since truck is stock. Where can I hook up a hand held fp guage to check pressure from lift pump?
Old 12-05-2006 | 10:38 AM
  #4  
displacedtexan's Avatar
Banned
 
Joined: Apr 2005
Posts: 3,337
Likes: 0
From: Place with no quail:(
There is a test port (schrader valve) close to the filter/pump. I'm not sure exactly where it is on an 02.

BTW- You really need to test it under load.
Old 12-05-2006 | 10:55 AM
  #5  
Codyboy's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 39
Likes: 0
o i thought testing it before starting and at idle was enough
Old 12-05-2006 | 11:22 AM
  #6  
displacedtexan's Avatar
Banned
 
Joined: Apr 2005
Posts: 3,337
Likes: 0
From: Place with no quail:(
It can test fine at idle, and under load still drop to much. That's why most run a gauge in the cab.

And welcomr to DTR, you will learn more from about your truck than you thought possible...
Old 12-05-2006 | 11:43 AM
  #7  
paulb's Avatar
Registered User
 
Joined: Jan 2005
Posts: 592
Likes: 1
From: Klamath Falls, OR
Originally Posted by displacedtexan
There is a test port (schrader valve) close to the filter/pump. I'm not sure exactly where it is on an 02.

BTW- You really need to test it under load.
On an 02 its on a bango bolt at the VP44 (injection pump). What he said about testing it under load.

Paul
Old 12-13-2006 | 02:24 PM
  #8  
1Rodeoguy's Avatar
Registered User
 
Joined: Dec 2006
Posts: 52
Likes: 0
If your interested in an the edge juice with the attitude monitor, go to

www.autoanything.com

I bought mine here for around $650!

Couldn't find a better deal.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jesussaves
1st Gen. Ram - All Topics
6
12-30-2009 07:35 PM
WChambers
Competition / Pulls / OffRoad
20
09-18-2007 08:06 PM
stevenknapp
3rd Generation Ram - Non Drivetrain - All Years
27
07-10-2004 02:11 AM
pappygtb
3rd Generation Ram - Non Drivetrain - All Years
5
03-07-2003 09:28 AM
RottnRam
2nd Gen. Dodge Ram - No Drivetrain
10
12-09-2002 02:29 PM




All times are GMT -5. The time now is 09:42 AM.