Can you guys fill me in
#1
Banned
Thread Starter
Can you guys fill me in
Im not sure if this is in hte right spot, but can anyone fill me in on which trannys and turbos went in our trucks, specs and what years? I started to follow it at one time then kinda lost track...So is their any list or anything...
Like this Tranny/Model#/Speeds/years
Something like that?
Thanks Mike
Like this Tranny/Model#/Speeds/years
Something like that?
Thanks Mike
#2
Registered User
#4
Registered User
Join Date: Aug 2003
Location: Jeffersonville, Ohio
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
94-2000 are all HX35's...but the later ones, I think in 99-00 had a smaller compressor wheel, with less blades/fins. A little more efficient
01-02 Sticks are still HX35, 01-02 Auto's are Hy35's...smaller exhaust housing for fast spool! Choke at 35psi!
Chris
01-02 Sticks are still HX35, 01-02 Auto's are Hy35's...smaller exhaust housing for fast spool! Choke at 35psi!
Chris
#6
Registered User
Join Date: Aug 2003
Location: Jeffersonville, Ohio
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
A wastegate allows exhaust gas to go around the turbo wheel, so it doesn't "pickup speed!"
Basically, we can use smaller turbine housings to get better spool, then wastegate them to keep boost down to safer levels!
Makes sense??
Chris
Basically, we can use smaller turbine housings to get better spool, then wastegate them to keep boost down to safer levels!
Makes sense??
Chris
Trending Topics
#12
Registered User
Perhaps Mike is asking about the waste gate actuator hose? (blue hose in picture)
If so, turbo pressure (cool air) passes from the turbo to the actuator (through the hose) and pushes down on a diaphram in the actuator to move the arm, which opens the waste gate at the desired pressure.
RJ
If so, turbo pressure (cool air) passes from the turbo to the actuator (through the hose) and pushes down on a diaphram in the actuator to move the arm, which opens the waste gate at the desired pressure.
RJ