Bluechip+mad+stg5inj+35/40=??
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Alaska
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Bluechip+mad+stg5inj+35/40=??
Just any rough guesses of what this combo would run in hp/tq#'s
tryin to figure if my drivetrain mods will hold up, tranny shop is courious what the truck is pushin so they can help me keep it together
Any guesses?
Bryan
tryin to figure if my drivetrain mods will hold up, tranny shop is courious what the truck is pushin so they can help me keep it together
Any guesses?
Bryan
#3
Registered User
Thread Starter
Join Date: Apr 2004
Location: Alaska
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Your exactly right I can't cool the pwr I got and defintally can't clear the smoke up at 45psi
With the current charger and 45psi got any guesses?
Bryan
With the current charger and 45psi got any guesses?
Bryan
#6
Registered User
Thread Starter
Join Date: Apr 2004
Location: Alaska
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
seems kinda high but there again I've never got a chance to dyno it though
So would 400+ be safe to tell them
And what kinda tq #'s would that generate roughly
Bryan
So would 400+ be safe to tell them
And what kinda tq #'s would that generate roughly
Bryan
Trending Topics
#9
Registered User
Thread Starter
Join Date: Apr 2004
Location: Alaska
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Well they dynoed the tranny ( didn't even know they could do that ) but it would only put out 6 or 700 ft lbs they said to their I should have no probs, lol 8 to 900 that might be a diff story
Bryan
Bryan
#10
Registered User
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Hope Bob doesn't mind me borrowing his dyno sheet, but your setup is very simular to his plus you have the blue chip, so you might very well be looking at 900+ considering the apb is supposed to add 85 hp worth of fuel. Looks like you might be in trouble even without the blue chip
#11
Registered User
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
On second thought- that was dynojet, so maybe you'd dyno at 900+ ft/lbs but your real world torque might be much lower.
Any smart guys want to help this man?
Any smart guys want to help this man?
Thread
Thread Starter
Forum
Replies
Last Post