BHAF vs Other Intakes
09-09-2007, 12:03 PM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Katy, TX
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
BHAF vs Other Intakes
So in my research for an intake system, i see that i can install the BHAF stuff (shield, cover, filter) for ~125-150. all other equivalent "systems" such as AFE, k&n, or Quadzilla cost at least $250.
where are the benefits to those systems? is it the ability to add a torque tube? i would think you could add a torque tube from the AFE kit (~$88) to the BHAF. then i would have something similar to the $400 AFE Stage II for around 200.
is there something i am missing here?
where are the benefits to those systems? is it the ability to add a torque tube? i would think you could add a torque tube from the AFE kit (~$88) to the BHAF. then i would have something similar to the $400 AFE Stage II for around 200.
is there something i am missing here?
09-09-2007, 01:11 PM
#2
Registered User
Join Date: Jan 2006
Location: edgewood NM
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
I think the issue is reuseability. The afe filter I have can be cleaned and reused for tens of thousands of miles. I dont think the bhaf can be cleaned and reused once its dirty. So in the long run it may not be cheaper. JMO
Thread
Thread Starter
Forum
Replies
Last Post
Tommy93w350
Performance and Accessories 2nd gen only
26
11-01-2005 05:35 PM
mitch@jc'sCTD
Performance and Accessories 2nd gen only
17
01-12-2005 08:45 PM