B1 Installed and its Awesome!
#1
Registered User
Thread Starter
Join Date: May 2002
Location: Aurora, Ontario
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
B1 Installed and its Awesome!
As some of you know I recently acquired a B1KS. I installed it today and I must say that it is an unbelieveable turbo! Its absolutely amazing how fast it spools it flat out spools my PDR 40 hands down with no question. My EGT's are easily 100 Degreese cooler on the initaial EGT spike my PDR 40 hit 1500+ this B1 is 1400 Even and then starts to pull em back even more to settle around the 1300 Mark I was very amazed with this. Installation is a snap and took 1.5 hours taking it easy. This turbo with my fueling mods makes about 48 PSI under WOT in OD with my DTT trans it makes about 42-44 WOT in frist, second and third. I am very pleased with this turbo and its lightning fast spoolup its amazing! For the 450 + HP crowd IMO its a must!
#2
Registered User
Join Date: May 2002
Location: New York
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Re:B1 Installed and its Awesome!
Jamie, I told you that 8 months ago. Now try John Russin injectors. you'll have to buy a 2000* pyro to keep an eye on the heat. Try the 8X11s you'll be suprised.
Danny
Danny
#4
Registered User
Thread Starter
Join Date: May 2002
Location: Aurora, Ontario
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
Re:B1 Installed and its Awesome!
I also wanted to add that I have noticed conciderably more bottom end puch or grunt to the truck. It seems to want to pull alot harder off the line then ever before.
danlit My EDM's From Don M are just fine for me if I need bigger Don is always more then happy to help me out.
By the way wildman if you read this whats my HP level estimated at? Anyone know of a spot to dyno my truck in my area?
danlit My EDM's From Don M are just fine for me if I need bigger Don is always more then happy to help me out.
By the way wildman if you read this whats my HP level estimated at? Anyone know of a spot to dyno my truck in my area?
#5
Top's Younger Twin
Re:B1 Installed and its Awesome!
Jamie, I was confident in your results in spite of what has been said about this turbo, or combination of products.
Not intended towards you Kat...others...yes.
Not intended towards you Kat...others...yes.
#6
DTR Advertiser
Re:B1 Installed and its Awesome!
Wildman 8) Prolly in the range of 450-475. Perhaps more
The paint job must add 50...so over 500
And your good looking gal adds another 120 or so :P
Don~
The paint job must add 50...so over 500
And your good looking gal adds another 120 or so :P
Don~
Trending Topics
#8
Registered User
Thread Starter
Join Date: May 2002
Location: Aurora, Ontario
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
Re:B1 Installed and its Awesome!
LOL Don should be good for any ricer event then. I want to sit right on 500 at the wheels what is needed from your experience to make that happen on my truck? I would like to also keep the B1KS as my single charger doing it all!
#9
DTR Advertiser
Re:B1 Installed and its Awesome!
Put the HX40 back on LOL!!! Seriously...a wastegate...divorced and slightly larger injectors...of course it may smoke a tad more for 500.
Don~
Don~
#11
Registered User
Thread Starter
Join Date: May 2002
Location: Aurora, Ontario
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
Re:B1 Installed and its Awesome!
LOL Yeah NOS is good! Love the turbo Scotty great BOMB wish I had got this one in the first place. Used PDR 40 forsale!
#12
Administrator
Re:B1 Installed and its Awesome!
[quote author=Scotty link=board=7;threadid=21709;start=0#msg203329 date=1067480125]
Wastegate and o-ring/studs then NOS
;D
[/quote]
NOS and Lowriders just go together like PB and J.
You already have the Nitrogen part, just add some Oxygen.
phox
Wastegate and o-ring/studs then NOS
;D
[/quote]
NOS and Lowriders just go together like PB and J.
You already have the Nitrogen part, just add some Oxygen.
phox
#13
Top's Younger Twin
Re:B1 Installed and its Awesome!
MMMMM PB n J
[quote author=phox_mulder link=board=7;threadid=21709;start=0#msg203334 date=1067480308]
[quote author=Scotty link=board=7;threadid=21709;start=0#msg203329 date=1067480125]
Wastegate and o-ring/studs then NOS
;D
[/quote]
NOS and Lowriders just go together like PB and J.
You already have the Nitrogen part, just add some Oxygen.
phox
[/quote]
[quote author=phox_mulder link=board=7;threadid=21709;start=0#msg203334 date=1067480308]
[quote author=Scotty link=board=7;threadid=21709;start=0#msg203329 date=1067480125]
Wastegate and o-ring/studs then NOS
;D
[/quote]
NOS and Lowriders just go together like PB and J.
You already have the Nitrogen part, just add some Oxygen.
phox
[/quote]
#15
DTR Advertiser
Re:B1 Installed and its Awesome!
[quote author=Scotty link=board=7;threadid=21709;start=0#msg203337 date=1067480397]
MMMMM PB n J
[quote author=phox_mulder link=board=7;threadid=21709;start=0#msg203334 date=1067480308]
[quote author=Scotty link=board=7;threadid=21709;start=0#msg203329 date=1067480125]
Wastegate and o-ring/studs then NOS
;D
[/quote]
NOS and Lowriders just go together like PB and J.
You already have the Nitrogen part, just add some Oxygen.
phox
[/quote]
[/quote]
Hey No Neck, you need a PB&J like you need a hole in the head. LOL! Well maybe the peanut butter part is a good idea for the protein.
MMMMM PB n J
[quote author=phox_mulder link=board=7;threadid=21709;start=0#msg203334 date=1067480308]
[quote author=Scotty link=board=7;threadid=21709;start=0#msg203329 date=1067480125]
Wastegate and o-ring/studs then NOS
;D
[/quote]
NOS and Lowriders just go together like PB and J.
You already have the Nitrogen part, just add some Oxygen.
phox
[/quote]
[/quote]
Hey No Neck, you need a PB&J like you need a hole in the head. LOL! Well maybe the peanut butter part is a good idea for the protein.