Another what do you then power post. 12V
#1
Registered User
Thread Starter
Another what do you think power post. 12V
I picked up a 97 the other day for a good price. Here's what I'm planing on doing. Tell me where you think I'll end up.
100 plate
4K GSK
DDP4's
laser cut DV's
AFC
Not sure on turbo/s
Anything I'm missing?
Sorry forgot to mention this is a 180 pump
100 plate
4K GSK
DDP4's
laser cut DV's
AFC
Not sure on turbo/s
Anything I'm missing?
Sorry forgot to mention this is a 180 pump
#2
Registered User
Join Date: Mar 2005
Location: fryeburg maine
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
well i think your gonna need a pretty well built auto or a good clutch.
ddp4's and laser cuts is a ton of fuel ... gonna be looking at a 64/12 64/14 minimum i would think with that kind of fuel or a smallish set of twins.
ddp4's and laser cuts is a ton of fuel ... gonna be looking at a 64/12 64/14 minimum i would think with that kind of fuel or a smallish set of twins.
#3
Registered User
Join Date: Jan 2006
Location: Shelby NC
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Yea you will need to do the tranny or you'll be sitting in the same boat I am. Mine went out last weekend. Also if you do any towing the facotry turbo will get hot quick. Im running a 62/14 and it cools real well but surges when towing with the auto.
Trending Topics
#9
Registered User
Thread Starter
It has an auto, but I'm pulling it and putting a 5spd in with a DD clutch. I didn't really plan on doing any head work just yet. That takes money and I'm on a limited budget right now. I'd like to go with a single for simplicity. Having twins was fun and building them was an experience, but.
#10
Registered User
Join Date: Dec 2003
Location: Garrard county, Kentucky
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Teddy Bear has a setup real close to that. He has a sps68 with a helix 2 cam, and ported head. It spools really good, but it still gets hot fast even with 25* timing. It is a great running combo though.
Eric
Eric
Thread
Thread Starter
Forum
Replies
Last Post
tfdcruiser
12 Valve Engine and Drivetrain
6
04-12-2020 01:26 PM
Diesel-Dan
12 Valve Engine and Drivetrain
20
09-22-2019 09:34 PM
ramdez
3rd Gen High Performance and Accessories (5.9L Only)
11
12-28-2009 03:55 PM
guyssets
24 Valve Engine and Drivetrain
12
04-27-2005 12:53 AM