ramcummins

Which tune are you running?
1000
2000
3000
dyno
comp
I tried the factory 1000 tune for a few days then loaded the dyno tune yesterday. I will try that for a while to see how I like it. So far, so good.

EBunger

Just loaded the 2000a since I got my Pulse and it is the smoothest so far for sure. PL2 is like my Drag Comp on 3x5.

dirtycj5

i've had the comp tune in my truck for about a month i like it. very strong low end

qzilla

PL02 is just on the Can Bus!!

You don't even need to tap the wire for that level to work!!!

cyric

I am running the 2000 tune and I love it.
Joe

seth08

i like the comp tune a lot better then any other 1 so far hooked with it last night got 299 feet

ramcummins

I just changed mine to the comp yesterday. It is a little jumpy, but it feels quite a bit stronger on the bottom end than the other tunes that I have tried (1000 and dyno).

2whistlers

I'm assuming that the ADR cannot be taken off like an '01 or '02 and put on say my '99 with just a map adapter? I realize this is a different box than most, but I was just curious. I have a guy that said he's got one stacked with a smarty which allows him 4000 rpm's. Anyone else having this kind rpm range or stacking the ADR? I realize the whole point of the ADR was to not have to stack, but if you can stack and get 4k then it definately seems worth it. Just curious.

Thanks

J Lent

ADR2000a here, a little shuddering going on, but I love it.

EBunger

Yes I agree the timing is a touch to much on the lower settings with injectors. But it doesnt hydro the injectors like the 3000 did to mine and seems smoothest otherwise on my truck.

Tate

For the ignorant or uninformed, whats the dyno tune about?

2whistlers

Nobody has answers to my questions???

1badchopper

The new comp is awesome

qzilla

2whistlers,

You can make it work but, you need to adapt the MAP sensors and you need to take the box apart and remove the jumper.

Ramtuff06

how does one get the comp and dyno tunes off quads site?