Adrenaline Surge Updates
#406
#407
Registered User
No! Still breaking in new head/gasket and taking it easy. Only played with newest ADR1000 on hwy at cruise!
Any suggestions. (probably need to read this thread for the last two weeks ).
Thanks GFB but what does that have to do with surging?
RJ
Any suggestions. (probably need to read this thread for the last two weeks ).
Thanks GFB but what does that have to do with surging?
RJ
#408
Not sure but it sure is fun. Actually it doesn't surge on my truck though, so in a round about way I guess it fits with the thread.
There's been nothing but smiles in my truck since I've started playing with the custom tuning.
There's been nothing but smiles in my truck since I've started playing with the custom tuning.
#409
i thot the scaling was psi based?
#410
#411
Registered User
EDIT: 12:30 - Just tried new (10/21) Comp Tune, no custom tuning, on Hwy at 60, 70, 80 mph. NO SURGE!!
Glad I waited before filling in surge form on Quads Web site!
RJ
#412
Registered User
Join Date: Nov 2006
Location: Rochester, NY
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
It's so minute that even though it needs the new firmware, I'm in no rush to get it fixed as I'm very happy with it in every other way.
Shawn
#413
Banned
With big injectors, try lowering your fuel stretch a little. Then play with the tps min & pump min settings, set both minimums at 30 & see if that helps with the surge. The lower the min settings, the more aggressive the fueling off idle.
#415
Banned
#416
Registered User
Thread Starter
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes
on
0 Posts
Worse case scenario send it to us and we can turn it around the same day we get it.
#417
Registered User
#418
Registered User
Join Date: Jun 2007
Location: jarretsville.
Posts: 1,060
Likes: 0
Received 0 Likes
on
0 Posts
well i think i will be filling out that form for firware. Had a good couple suges on the comp tune at all levels after 3.Ill try it out again and see whats up.
#419
Registered User
Join Date: May 2005
Location: W-S, NC
Posts: 1,348
Likes: 0
Received 0 Likes
on
0 Posts
I just ran the new comp tune in my truck. It ran great and surge free on level 3. The problem is that I could not get the level to increase past pl3?
Unplug and plug back in?
Unplug and plug back in?
#420
Registered User
Thread Starter
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes
on
0 Posts
Nope, you probably are running Tune 1 or Tune 2 by accident.
Go into the custom tuning menu and select the Factory Default as the tune you want to run and see if it returns.
If that does not work go into the menu and see if the # of Power Levels is set to 4. 4 Power Levels = 0-3
PS. I bet the jump from PL02 to PL03 is quite large!!!
Go into the custom tuning menu and select the Factory Default as the tune you want to run and see if it returns.
If that does not work go into the menu and see if the # of Power Levels is set to 4. 4 Power Levels = 0-3
PS. I bet the jump from PL02 to PL03 is quite large!!!