Adrenaline Comp Beta Tunes
#31
Banned
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
I tried this just a little while ago and the truck is undrivable on anyting above PL04. There's just so much stumbling I can't get to WOT. It's worse than how it acts with the "Aggressive" files on your site. I then tried a "non-aggressive" file for the first time (ADR1003) and this is really the only tune that I can actually take it to WOT without stumbling to bad.
Just curoius, but do you have any beta testers running a Monster VP? I would be curious to know if thats going to be the magic recipe for those that are running 240+hp injectors to compliment the Comp and Aggressive tunes. If not, I can send it to a buddy who's putting down 800+hp on fuel with one of these pumps just for S's & G's.
Just curoius, but do you have any beta testers running a Monster VP? I would be curious to know if thats going to be the magic recipe for those that are running 240+hp injectors to compliment the Comp and Aggressive tunes. If not, I can send it to a buddy who's putting down 800+hp on fuel with one of these pumps just for S's & G's.
#34
Registered User
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
#35
Banned
I never had the TST, but it is comparable to some of the older Adrenaline files. That annoying shutter we all had at mid rpm is now extended to 2500rpm, but it sure does have some kick to it.
#36
Banned
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
Not downing the adrenaline because its obviously working out for some guys but I guarantee the input on a 5-spd doesnt break from just too much HP going to at your level, especially at 30mph where it could break the tires loose...but that shaft was damaged slightly on one of you previous runs down the road with the bad surging and weakened it and the last time you hammered on it is all it could take.
Hope you get a 1-3/8" upgrade and get it back together.
Hope you get a 1-3/8" upgrade and get it back together.
#37
Registered User
Join Date: Jan 2004
Location: Springfield, OH
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
That's exactley how violent it is for me. Bring the tach up to 2k RPM and drop it in gear, to give you an idea.
#38
Chapter President
Join Date: Jun 2007
Location: Elk River, MN
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Went out today fro about 40 miles with the Comp tune. This is for sure an all or nothing tune. I was able to get it to be somewhat manageable on the highway, (I realize this is not what this is intended for). When on thew pedal hard it pulls like you wont believe, but back off slightly and the stumbling starts immediately. Oh yea got pulled home by the boy's Powerstroke, seems the tranny does not like the Comp file. I was wondering just how long I could survive on borrowed time.
#40
Chapter President
Join Date: Jun 2007
Location: Elk River, MN
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
#42
Registered User
Thread Starter
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes
on
0 Posts
I backed it off some and we are testing it right now.
How the crap are you breaking parts? Did you try that on a stock auto truck????? If so you are CRAZY!!!!!!!!!!!!!!
I backed it off some and we will see if it is better or worse.
J_Double, I have a special file for you though.
How the crap are you breaking parts? Did you try that on a stock auto truck????? If so you are CRAZY!!!!!!!!!!!!!!
I backed it off some and we will see if it is better or worse.
J_Double, I have a special file for you though.
#43
Chapter President
Join Date: Jun 2007
Location: Elk River, MN
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
#45
Chapter President
Join Date: Jun 2007
Location: Elk River, MN
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts