8 to 10 lug adapters for 22.5s
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: Durham, NC
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
8 to 10 lug adapters for 22.5s
So I am looking at putting a set of 22.5s on my truck and need adapters. I am about to start a machining class at the local community college for fun. I figure this may give me the opportunity to make a set of adapters for my truck.
Does anyone have any pictures / diagrams / CAD drawings of a set of 8 to 10 lug adapters. The wheels im looking at are 10 x 285.75 mm.
Also if anyone has any pictures of 2nd gen duallys on 22.5s post them up just for fun.
Does anyone have any pictures / diagrams / CAD drawings of a set of 8 to 10 lug adapters. The wheels im looking at are 10 x 285.75 mm.
Also if anyone has any pictures of 2nd gen duallys on 22.5s post them up just for fun.
#3
Registered User
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
If you're going to make them just remember the Alcoas you're talking about are hub centric, So a pseudo hub lip has to be machined in too. I saved a pic of that adapter somewhere........
#5
Registered User
Join Date: Oct 2006
Location: Okotoks AB
Posts: 3,142
Likes: 0
Received 0 Likes
on
0 Posts
Sorry no actual Dims, but they really are pretty simple. You could figure out what you need if you measure an alcoa hole, give it + 10 or 20 thousandths for good measure. then do your pattern lay outs. just make sure the tangs for the rear duals (if you have duals) is tall enough to capture both rims.
Thread
Thread Starter
Forum
Replies
Last Post
jhenson
3rd Gen Engine and Drivetrain -> 2003-2007
1
01-11-2012 12:41 PM
Pinkston
3rd Gen High Performance and Accessories (5.9L Only)
2
09-10-2007 09:18 PM
Trebor
1st Gen. Ram - All Topics
4
09-14-2006 04:52 PM