500 hp in four wheeler
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: Palmer Alaska
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
500 hp in four wheeler
I saw the last article of the 01.5 and they bumped it up to 500 hp and 1000ft/lb torque. Is that possible? Is the dyno off. It seems a little high.
#5
Registered User
Join Date: Oct 2003
Location: albuquerque NM
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
the magazine did almost the same setup that I am running but I have{IMHO} a better turbo and injectors.when I read the 500 hp article I wanted to dyno my truck bad but could find a dyno that could read the Cummins.I cant wait.
#6
Registered User
Join Date: Jul 2003
Location: The Great White North
Posts: 7,129
Likes: 0
Received 0 Likes
on
0 Posts
ridofpwrstroke,
We have a few mmbers here with much bigger HP than that. The one that first comes to mind is Jim Fulmer - hes got a 800+ hp 12V. I believe he drives it to work. Jet Pilot and Maddog are pushing way past 600 hp as well.
We have a few mmbers here with much bigger HP than that. The one that first comes to mind is Jim Fulmer - hes got a 800+ hp 12V. I believe he drives it to work. Jet Pilot and Maddog are pushing way past 600 hp as well.
#7
Registered User
Thread Starter
Join Date: Sep 2002
Location: Palmer Alaska
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
No, I understand that you can get more than 500hp. I was just curious if that article, with that setup would be accurate. I had 3 people send me that same article of here, and I have been anxiously waiting to install that same list of parts. You can look at my sig and see what i have right now. I just wanted to get an opinion of everyone if that is possible with the setup they have put in the magazine.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Erik88GT
Performance and Accessories 2nd gen only
10
03-10-2005 08:43 AM
Lary Ellis (Top)
Site News
28
05-16-2004 10:33 PM
Suburbanite
1st Gen. Ram - All Topics
3
10-24-2003 10:02 AM