4LHR and HX35 twins
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Albuquerque, NM
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
4LHR and HX35 twins
So I got a 4LHR on the way which I hear is almost identical to a HT3B, what other parts will I need? 50mm wastegate? tube, hoses, clamps? oh and a 5 inch exhaust too.
is this setup going to work well?
is this setup going to work well?
#6
Registered User
Join Date: Sep 2003
Location: Gilbert, Az
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Lance with the amount of fuel we have I am using a stock wastegate that is modified and it works fine. When I add more fuel I will do an external wg but for now this setup works suprisingly well.
Trending Topics
#8
Registered User
Join Date: Sep 2004
Location: fortuna
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Look on the inside of the exhaust intrey and see if there is a #. If not get a closeup pic of the #s on the side of the flange and i can find out for you. If i was to guess i would say a 32cm.
#10
Registered User
Thread Starter
Join Date: Oct 2003
Location: Albuquerque, NM
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
Well it came in the mail today, and the numbers I see on the exhaust housing are:
2042 -inside the exhaust entrance
204244 - on the outside of the exhaust housing
also 26650 on there too.
2042 -inside the exhaust entrance
204244 - on the outside of the exhaust housing
also 26650 on there too.