4kgsk and 0 plate installed...
07-21-2006, 02:33 AM
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: Lancaster, Ky
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
4kgsk and 0 plate installed...
Got cumminsdriver to install my 4K spring kit and a 0 plate tonight. What a difference it made! Aint nothin like the sound of a 12valve cummins at about 3500rpm 
Thats about as high as i have taken it so far because i dont have the HD valve springs yet, but from what i can tell i think it would at least rev to 3800 or so. But lemme just tell ya, If my tranny could talk... itd probably give me a good cussin 
When the TC is locked you can pretty much just slip it on demand 
, so needless to say you HAVE to go easy on the pedal. But hopefully here in the next couple weeks my stock tranny will be replaced with a full billet goerend tranny 
So i guess i'll just try to take it easy on the go pedal for a while.
Thats about as high as i have taken it so far because i dont have the HD valve springs yet, but from what i can tell i think it would at least rev to 3800 or so. But lemme just tell ya, If my tranny could talk... itd probably give me a good cussin When the TC is locked you can pretty much just slip it on demand , so needless to say you HAVE to go easy on the pedal. But hopefully here in the next couple weeks my stock tranny will be replaced with a full billet goerend tranny So i guess i'll just try to take it easy on the go pedal for a while.
Thread
Thread Starter
Forum
Replies
Last Post
RichN
Performance and Accessories 2nd gen only
11
03-09-2010 05:49 PM
Dufrain
Performance and Accessories 2nd gen only
29
11-15-2004 05:00 PM