4" Exhaust
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Phelan Ca.
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
4" Exhaust
I am looking at 4" exhaust systems trying to deside on one. thinking about getting the silverline or the Hog performance system. both systems are T304 stainless . any advise ?
#2
Registered User
Join Date: Apr 2005
Location: Iola, Tx.
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Not familiar with those two, but RIP ROOK has some nice systems, really cheap prices, I personally do not like the stainless system for the fact that they are more prone to cracking, I prefer aluminized steel. Just my 2 cents
#4
Banned
Join Date: May 2003
Location: Nashvile Tennessee
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
mojave_ron,
Both will bolt on and work for you, however you're in CA and 304 might be over kill for that part of the USA! You can get a 409 system from us for about 30% less and still be upgrading to a better material than stock, or go with an aluminized for even less and it will last a long time in CA. Plus all of ours are made in N.A., so you're keeping your money here in the good ole USA a lot more than off shore products! Call us if you have any questions etc.
Mark @ DPPI
Both will bolt on and work for you, however you're in CA and 304 might be over kill for that part of the USA! You can get a 409 system from us for about 30% less and still be upgrading to a better material than stock, or go with an aluminized for even less and it will last a long time in CA. Plus all of ours are made in N.A., so you're keeping your money here in the good ole USA a lot more than off shore products! Call us if you have any questions etc.
Mark @ DPPI
Thread
Thread Starter
Forum
Replies
Last Post
roughstock
3rd Gen High Performance and Accessories (5.9L Only)
7
11-02-2013 01:48 PM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
VikingDiesel
3rd Gen High Performance and Accessories (5.9L Only)
47
05-11-2007 12:52 AM
Hemlockusa
Towing and Hauling / RV
16
01-28-2006 07:07 AM