2nd Gen Cab roof lights Harness?wiring?
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: Lecco, Italy
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
2nd Gen Cab roof lights Harness?wiring?
what type of wiring harness can I use to plug the cab lights? whre I can keep the source to lighten them? from overhead console maybe
let me see your install, I wanna install them with a on off switch in the OH console..
any suggestion will be much apprecciate
rob
let me see your install, I wanna install them with a on off switch in the OH console..
any suggestion will be much apprecciate
rob
Trending Topics
#12
Registered User
I ran my wire to the headlight switch. Just find a hot wire when the parking and headlights are on. If you pull your headliner down you should already have holes in your roof on the inside as it is a two piece desine. I got a 1 or 1and 1/8 inch holesaw and it fit perfectly in the holes,just drill from the inside out and you cant mess up. I also got all my lights and full harness from a wrecking yard for 50 bucks.
#15
Its a simple series curcit Im in college right now at Suny Morrisville and that is what were learning in D-Tec Electrical.
Dont think it sould be that hard getting them to light up run a fusiable wire from the dash lights or something like that. I would find a template thought wouldent want to make them crooked or anything!
Dont think it sould be that hard getting them to light up run a fusiable wire from the dash lights or something like that. I would find a template thought wouldent want to make them crooked or anything!