24 Valve camshaft need good ideas.
#49
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
If you motor good, how much blow-by you getting? Is it coating your hood? Is oil covering your rad? If your getting abit of oil at the bottle, I wouldn't worry about it. Sounds like you got a winner of a motor combo. I wouldn't change anything. The most HP I could make on a HY35 turbo was 400rwhp and had sky high egt's and that post turbo egt's. The turbo was a dark brown color. We've seen the pictures of motor's running to hot of egt's and coolant temps but saying that when I took my motor head off, everything looked good inside. The head was in good shape. I only ran 90rwhp injectors and an edge comp box.
#50
Registered User
Thread Starter
Join Date: Jul 2007
Location: Stephenville Tx
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
My turbo is a little mis colored and have not taken the topend off yet. I dont have a bottle for the blow by its a hose on the front cover and when I run it hard it covers underneath my truck pretty bad. When I get done towing my loads it drips for about 30 min from the tube and empty it does not leak any or blow it out. Got a motor this weekend took the top end off and off and it looks good so... I hope I got a good start on a new builder. Found out that the turbo was a hx-40 not a 35. I am thinking about the bd super special twin set up for the new one but $$$$ kinda tight.
Thread
Thread Starter
Forum
Replies
Last Post
supercharged_hp
3rd Gen Engine and Drivetrain -> 2003-2007
4
10-29-2008 03:34 PM
mde
3rd Gen Engine and Drivetrain -> 2003-2007
1
09-11-2008 02:01 PM
Katmandu
12 Valve Engine and Drivetrain
104
01-28-2006 05:05 PM