triton0708

I just got a killer deal on stacks from a friend of mine. Free plumbing, just like the 5" kits from ebay, all I have to do is buy the stacks. Do I want turn-outs or mitre cuts? I think the mitre cuts look best, and I know I can drill a water hole at the bottom, but I have not seen many 1st gen's with dual stacks.... Post pics please.

manganos

I envy you. Now that I just bought this RV I think I'm going to keep the cap on the back. I'd like to have stacks to keep the smoke off the RV though.

Bosshawg600

If its a reg. cab go with mitre cuts. I think that turn outs only look right on Ext cabs and DRW. But stacks are def. cool!

rockjeep73

Heres mine...

JD730

Here's probably the worst and only picture I have of it.

triton0708

Sweet pics guys, looks like I need to find some ***** to cut that hole in my bed.

haloman

Don't worry about the hole in the bed. I drilled holes in a circle and the connected the dots with a jigsaw. The hole makes for a nice drain whe washing the bed out.

ihpower

Heres my truck it now has rain caps on them. I went with the black because it goes better with the truck and i like to be diffrent.

HappyGA

Question???

How hot do the stacks get around the window? I mean do they get hot enough to the point where they will start to melt the seal?

I notcied a milk crate by one of the stacks in a picture, Would the stacks say be cool enough for the milk crate to rest against it?

JD730

Mine have leaves around them. Hasn't caught fire yet. They're hot enough you wouldn't want to grab a hold and hang on to them.

ihpower

I have the milk crate in there to hold hitch pins and some little odds and ends and i have never had any problems. But the stacks will melt a cooler lid, that is the whitish brown blob on the left stack. Milk crate no problems, Mt Dew and coolers thye will melt.