12V Airdog fuel pressure
03-03-2008 | 09:16 PM
#1
Thread Starter
Registered User
Joined: Nov 2005
Posts: 210
Likes: 0
From: Hunt Valley, MD
12V Airdog fuel pressure
Just got done installing the Airdog. So far so good, the truck idles better and I swear it feels like it has more power. I see 24-25 psi at all times. Is this right? I thought I had heard 30 psi at all times. I might have some air still in the line?!?!
Any thoughts?
Any thoughts?
03-04-2008 | 03:40 AM
#3
Registered User
Joined: Aug 2007
Posts: 261
Likes: 1
Thats what I get with my air dog wont pull down even under acceleration.
03-04-2008 | 07:25 AM
#4
Thread Starter
Registered User
Joined: Nov 2005
Posts: 210
Likes: 0
From: Hunt Valley, MD
Its the 100, yeah forgot that part. I had heard 30 psi at some point - I could just be imagining it too.
Ed - cool thanks, just wanted to hear someone else have the same pressure.
Ed - cool thanks, just wanted to hear someone else have the same pressure.
03-04-2008 | 07:32 PM
#5
Registered User
Joined: Aug 2007
Posts: 1,133
Likes: 1
From: Beautiful USA!
Stretch the spring inside the overflow, it will give you more PSI.
BTW I can pull my AirDog100 down to 18psi under WOT on my 97 12valve. I just emailed Joe at Pure Flow to see if ther is a way to bump the pressure up some.
BTW I can pull my AirDog100 down to 18psi under WOT on my 97 12valve. I just emailed Joe at Pure Flow to see if ther is a way to bump the pressure up some.
Thread
Thread Starter
Forum
Replies
Last Post
kdbvulcan
3rd Gen High Performance and Accessories (5.9L Only)
20
12-06-2008 05:34 PM
twoscooterz
Performance and Accessories 2nd gen only
4
03-13-2008 12:38 AM