Polishing Aluminum
05-22-2008, 07:05 PM
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: Danbury, Ct
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Polishing Aluminum
I just picked up a 2000 Mack r-model, 425, 18 speed with a j&j aluminum body. At one time it was polished but the last owner let it go. I have tried everything to bring it back but I cant seem to figure it out. Its oxidized and dull. I just want to make it look all the same and at least shine alittle. Thanks for any help in advance.
05-22-2008, 07:42 PM
#2
Administrator ........ DTR's puttin fires out and workin on big trucks admin
We use this companies products, their aluminum polish has brought back fuel tanks and rims to a near new finish, lots of elbow grease required.
http://www.carproductsinc.com/
Tim
http://www.carproductsinc.com/
Tim
05-22-2008, 08:20 PM
#3
Registered User
Join Date: Jun 2004
Location: SunnyVale Trailer Park
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
We use stuff called "speed" at work , it's about 100 bucks a gallon , spray it on , let it do it's thing for a few mins, then rinse it off , and wash the area with some good car wash soap , then polish the area once dry , with some polish compound and a rag , comes out looking like a mirror.
Thread
Thread Starter
Forum
Replies
Last Post