heaviest toolbags
#16
When I worked in our Machinery Group in an overhaul crew. We had a 20' container that was decked out as our toolbox. It weighed almost 10 ton. Everyone also had a custom built aluminum hand box stuffed with everything up to about 1-1/4". They weighed anywhere from 85-120#. We always had to weigh them when we would have to do troubleshooting trips and fly on heli's.
#17
I guess your not connecting with that belt on? Suspender type or just lineman bags with belt and scaboards? Why three pins? one full size pin and a stubby should do it. If you can't make them holes match with that equipment, you might want to look into one of those "porta-torch' set up's to just blow your own bolt holes??
#18
Guest
Posts: n/a
suspender type harness, carry all 3 when making splices, other guys dont carry any so i rent them out also. i have rental units. have scabbard with hole in it for sleever bar. 7/8 inch bar washer jb welded on it. and tape measure. i carry as much as i can connecting
Thread
Thread Starter
Forum
Replies
Last Post
Sean S
Towing and Hauling / RV
10
11-20-2003 10:23 PM