DTRs BREAKROOM and Food forum 8/30-9/5/2009
#331
Administrator/Jarhead
Evenin...
Scotty, I've seen them before. Good times.
Blake... bumpers?
I got my ball joints done today... I did the first side in 3 hours, and the other side in 2... Chris taught me the finer points of pain on the passenger side... I got the driver side done pretty quick.
Floated the dang keg...
A big thanks goes out to Chris, he drove all the way down there to help me. I owe him big time.
See ya'll in the am. I'm whooped.
Scotty, I've seen them before. Good times.
Blake... bumpers?
I got my ball joints done today... I did the first side in 3 hours, and the other side in 2... Chris taught me the finer points of pain on the passenger side... I got the driver side done pretty quick.
Floated the dang keg...
A big thanks goes out to Chris, he drove all the way down there to help me. I owe him big time.
See ya'll in the am. I'm whooped.
#332
DTR's Locomotive Superhero and the DTR Sweet Tea Specialist
Now its right side up cake!
Cool pics scott! I ended up washing the truck and then stacking hay. The wheel seal got put off for another day.
Blake, I've done a few installs of airdogs on trucks. Most dodges and a few fords. I found out that you need to modify the mounting braket most of the time. A few have bolted right up but a couple trucks have need changes to the braket.
Sawed 448 board feet of red oak lumber today, all from one log. At .45/BF, that netted me a whopping $201 for the day. Better than nothing I guess, but what a fight I had with that log! Didn't want to turn, didn't want to stay still once I got it turned, and the 1 1/2" X 7" X 16 foot lumber I was sawing off it was HEAVY.
Well, that was MY day, what's everyone else up to?
chaikwa.
Well, that was MY day, what's everyone else up to?
chaikwa.
Blake, I've done a few installs of airdogs on trucks. Most dodges and a few fords. I found out that you need to modify the mounting braket most of the time. A few have bolted right up but a couple trucks have need changes to the braket.
Thread
Thread Starter
Forum
Replies
Last Post
Red3quarter
Other
341
01-05-2010 09:38 PM
Red3quarter
Other
249
11-21-2009 10:54 PM
Red3quarter
Other
408
08-08-2009 10:17 PM
Red3quarter
Other
313
05-17-2009 12:06 AM