Claws or TSL radials for the CTD?
#16
Registered User
Join Date: Jul 2005
Location: menomonie,wisconsin
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
With the right backspacing and offset, I think you could run the 37's. If I could run a 33x15.5-16.5 at my stock height,(thay are actually closer to 34's) I think with 4.5" of lift you could clear them. As gotlift said, you might have to do some trimming, but you could make them work. If I were you, I would check out what some of the other lifted truck are running on here, and some off-road forums. Good luck and let us know on your decision
#19
Registered User
Join Date: May 2003
Location: The 951-Flatbill center of the universe
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
I run 37" SSR's with 6" and I can still rub 'em. I ran 36's with 4.5" and they rubbed.
They fit, but they'll rub when you compress the suspension with the wheels turned.....
They fit, but they'll rub when you compress the suspension with the wheels turned.....
#20
Registered User
Join Date: Nov 2004
Location: Connecticut
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Here is a god link I found, they review a ton of mud terrain tires, im looking at a set my self. http://www.offroaders.com/tech/AT-MT...mperBogger.htm
Thread
Thread Starter
Forum
Replies
Last Post
ScottN
Performance and Accessories 2nd gen only
5
12-30-2007 12:27 PM
jrostocki
3rd Gen High Performance and Accessories (5.9L Only)
13
02-24-2005 11:00 AM
FastZilla
3rd Generation Ram - Non Drivetrain - All Years
4
10-23-2004 12:15 PM
Ramasaur
3rd Gen Engine and Drivetrain -> 2003-2007
10
09-10-2004 07:03 PM
ET_178z
Performance and Accessories 2nd gen only
2
05-09-2003 10:37 AM