Any Electricians?
#16
Registered User
Thread Starter
Join Date: Mar 2006
Location: Oklahoma
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Yeah does not suprise me they did something like that scenario.. I will pick up a new GFCI breaker and wire it correctly, and pull the regular GE 20 AMP breaker...
Hub
Hub
#18
Registered User
Join Date: Nov 2003
Location: Central Coast Ca
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Cool deal. Make sure to test it. If you have a shaker type tester you can put one lead on the hot and ground the other lead and the breaker should trip. It's much easier to use a gfci tester. It is just a plug that you plug in and has a series of lights that tells you if you are wired correctly. Then it has a button that you can press to trip the gfci. It has a resistor that throws the load out of balance so it trips. The gfci tester is around $10. The only drawback is that it won't test correctly unless you have a mechanical ground.
#19
Registered User
Thread Starter
Join Date: Mar 2006
Location: Oklahoma
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
well I do not have the GFCI version but the plain version and I plugged it into the outlet and it tripped. The instructions on the tester said it would do that... I plugged a hair dryer and a vaccum cleaner into the outlet and it does not trip.
Yet another reason to love the internet...
Thanks Again!
Hub
Yet another reason to love the internet...
Thanks Again!
Hub
#21
Administrator
I have run into this allot in some of the Chinese built condos or remodels out here, It looks like they could not get them to work correctly so the switched the lead to a standard breaker, leaving some unsuspecting tenant to get hung up when they drop their curling iron in the sink.
I find a lot of poorly crimped Buchanan’s on the bare wires in the box, loose screws on the recieptles, usually when I have to replace the burned wiring.
I find a lot of poorly crimped Buchanan’s on the bare wires in the box, loose screws on the recieptles, usually when I have to replace the burned wiring.
#22
Registered User
Join Date: Jun 2002
Location: Bellingham Washington
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
I have run into this allot in some of the Chinese built condos or remodels out here, It looks like they could not get them to work correctly so the switched the lead to a standard breaker, leaving some unsuspecting tenant to get hung up when they drop their curling iron in the sink.
I find a lot of poorly crimped Buchanan’s on the bare wires in the box, loose screws on the recieptles, usually when I have to replace the burned wiring.
I find a lot of poorly crimped Buchanan’s on the bare wires in the box, loose screws on the recieptles, usually when I have to replace the burned wiring.
~Dave
Thread
Thread Starter
Forum
Replies
Last Post
Tommy93w350
Performance and Accessories 2nd gen only
5
12-07-2005 11:33 AM