Bryan,

Put your truck in the shop and check the weather radar. NOW!

 

I think its all passed... doesn't look too bad... I'll check it out tomarrow... At least the sun is out now.....
We'll just race from the road to the shop... if you don't make.. I think I can find a tractor.. or 3-5.. but if we don't get anymore.. I think we've got it made...
Good thing I've got tomorrow to get things cleaned up...
Bryan

(Charlie.. nothing like having a 2 car garage.. that's 6in too short for your truck... good thing I have a car port that parks three... 1 truck.. 1 pulling tractor.. and the gooseneck.. )

 

"cleaned up..."

Do you mean the new gravel or did you get some of the hail and winds? On the TV radar they showed a pretty strong cell that looked like it was coming up your driveway.

 

As in cleaning up the shop.. its really too bad inside... but I do have the tractor inside that I was pushing mud and gravel with today... I'll see if I can work some of the bumps out of the gravel.. two loads goes about 20ft with my grading... only another hundred or two more to go...
Bryan

 

I had to spread four loads on my driveway to the barn with my Polaris. About 600 feet. I had to use my Swisher front-loader and front blade. It's not the smoothest thing......but it's not muddy.

Since my old MF isn't running, would you like to borrow my scrapper box? It's just sitting around not being used. I could bring it tomorrow.

CR

 

Thanks CR.. but I'll have it covered by then... Just need to run out to China Spring and pick it up... headed that way in a few mins... All is looking good...

Who else was needing to work on their trucks????
CR+FassII
Gauges???
Anyone else...
I got 2 S300's we might disassemble.. one is stuck.. not sure about the other...

Bryan

(Over 60 reply's here on the DTR.. (yea.. alot of BS too..) and only 2 on the TDR..... whatever..)

 

JB just called. He and Wayne will be there.

 

What ever CR...

It will be good to see those two again... and hear some good BS from JB... And they better not be in a PSD... (Although.. JB would do it just dispite us.. ) Maybe the Green Limo... (the vette would be OK too...

Got to go mow the driveway...
Bryan

 

I knew that was coming..........

 

I may be putting in a mystery switch but that wont need any tools I dont think.

 

I might do my clucth master cyl/ slave cyl as long as we are there

 

Sounds good guys... I talked to dig today... he might do a pump relocation...
I got room for two in the shop... maybe the nose of a third...

We have few things to discuss..
There is a dyno day in Buda, on the 18th...
If anyone is interested in pulling their truck.. (that means.. pulling a sled with their truck) we might be able to set something up for Friday night the 17th.. I'll have to talk to the sled owner.. the pull would be in Stephenville...
Bryan

 

Great time today guys... I think we had 17 trucks... and some good smoke shows on the way to the shop... I have posted some pics... I know there are others...
And of course I had to post this pic... of "Mr Wonderfull"... our Pres in action... at his finest.. "Man these curls are hard."... Who's truck is that anyways...
http://photobucket.com/albums/v495/JDGnut/Truck%20Pics/


Bryan

 

The train of Diesels.. what a site..
IMG]http://img.photobucket.com/albums/v495/JDGnut/Truck%20Pics/MVC-378F.jpg[/IMG]




Finally ALL here...

 

Looks like great fun. I wish I could have made it.

Next time!