lukedaemon

I like to archive pictures, articles, art, etc. on my file server here. I spoke to Scott about this article and I finally located my located my magazine. I figured I would share the digital file for those that might have missed it.



Peace

Chris Taylor

C E L Codes


P0237 Low input voltage for boost pressure sensor "A" for current engine conditions

P0336 Crankshaft position sensor

Added a Edge about 1 1/2 months ago with out codes.
Changed fuel filter, oil + filter, and air filter and got these codes next day.

New to this stuff, what do I check or fix.

scottsjeeprolet

Chris go ahead and clear the codes and see if they come back. Let us know what happens. Also you might want post this question in the help section.

crabbelle

has anybody ever changed a cam in the cave? i got a few things i wanna do while we tear apart the front end, like new hoses, coolant and maybe a light wieght fan

Chris Taylor

Yeah it has come and gone for about a week. I did post it first in the help section but thought I would ask here too.

skynyrd

travis has pulled a cam but it was out of his block that wasn't in the truck. at some point soon i will be doing cam and springs in the silver bullet! thats right boys and girls i'm going to be rebuilding the silver bullet.

bootsdodgejn

TOTALY SWEET

06 DIESEL

Yes I pulled the cam in my block, but it was upside down and did not have to worry about the tappets.

Good to hear that the silver bullet will be rebuilt, let me know when we start, I will be able to give you a hand once I am moved in, until then I have to get done remodeling it.

scottsjeeprolet

Ok guys, I'm missing from the Cave my wire strippers and 2 small yellow handle screw drivers. Who ever left by accident with them in their pockets i would like to get them back ASAP. thanks
Remember if you come over to use the lift or air compressor there is a $20 charge or 5 gallons of gas for the generator use.

We are gonna need some help getting the apartment ready for Travis. If you can lay carpet, stick on tile or do sheet rock we need your help. Only have 2 weeks to get it done and start moving Travis in.

lukedaemon

I am not very good (no experience) at any of the above, but if I am off when stuff is being done I am willing to at least help in any way I can. Shoot me any email or whatever if there is anything that I can help with.

Heck if staying out of the way helps I can do that too. J/K

Peace

Crabjoe

So the rumors are true! You are officially adopting Travis.

When you looking for help?? It just so happens, I purchased one of the kick with your knee carpet stretchers a couple weeks ago. I might have never installed carpet, but I have the tool now.

Sea:\>Drive

I can hang drywall but not finish it, and I'm slow. Unfortunately I'm booked until Sunday (it is softball season so my girls take up all my free time during the week).

biggerkin

If you are talking about floor tile I could help. Give me a call and let me know when you want to do it

skynyrd

well i can do it all so let me know!

scottsjeeprolet

Well Leonard we'll be working on it tomorrow night & the next night & not Sat but then on Sunday and on and on until it's done.
So come on over any night.