HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

truck died tonght and will not start

Thread Tools
 
Search this Thread
 
Old 02-13-2007 | 11:14 PM
  #1  
evan3000's Avatar
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 56
Likes: 0
From: Alberta, Canada
truck died tonght and will not start

I just sold my truck to a friend,(thats probable my first problem.) He told me that he was taking his friends out for a ride, and after he stomped on it for a couple hundred yards, he came to a red light and when he stopped the truck died, and will not restart He said that he is seeing a po500 code and a p1693 code. the fuel pressure is good I am told. Any ideas? Thanx guys
Old 02-13-2007 | 11:15 PM
  #2  
phox_mulder's Avatar
Administrator
 
Joined: May 2002
Posts: 6,522
Likes: 1
From: Sandy, Utah
Out of fuel?

If not, the 1693 code might be pointing to a VP44 death code.


phox
Old 02-13-2007 | 11:33 PM
  #3  
evan3000's Avatar
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 56
Likes: 0
From: Alberta, Canada
I think that code was on from my last IP.,that I changed out, about 6 months ago?
Old 02-14-2007 | 08:22 PM
  #4  
bent valves's Avatar
Registered User
 
Joined: Feb 2007
Posts: 292
Likes: 1
From: New England
I don’t know if this is the problem but I have read that the VP44 can lose fuel with a quick letting off of the accelerator. The fix is to crack the injector lines and bleed air out. Good luck.
Old 02-14-2007 | 10:56 PM
  #5  
evan3000's Avatar
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 56
Likes: 0
From: Alberta, Canada
Good call Dave I just got in from buddy's house and thats how we got it going again, I had noticed before that if you were hard on the gas let off, and came to a stop it would start to run rough, but never die? When I cracked all the lines they were full of bubbles. What would cause this? I seemed to start once I installed my injectors?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mario_lima1
HELP!
7
09-01-2014 01:19 PM
Mark Hodowanec
3rd Gen Engine and Drivetrain -> 2003-2007
11
12-01-2012 06:42 PM
ado2b1
HELP!
1
01-08-2010 04:27 PM
jckdann7
1st Gen. Ram - All Topics
3
08-31-2008 12:13 PM
drew03
24 Valve Engine and Drivetrain
2
09-21-2005 09:56 AM



Quick Reply: truck died tonght and will not start



All times are GMT -5. The time now is 06:28 PM.