HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

Horrible milage. What all could it be.

Thread Tools
 
Search this Thread
 
Old 04-04-2008 | 10:00 AM
  #16  
Bad Ramer Jamer's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 1,041
Likes: 3
From: IL
Do you really think it could make a 5mpg differance.

Where is the map sensor located. Is it the one in the air filter. If so, that maybe the problem. I recently cleaned my afe filter. Would it mess the sensor up if I used too much oil.

If it's the one in the air filter, and I used too much oil, could it make the engine run lean, making the soot go away like I said earlier. BTW,,,the soot is back now along with the better milage. Is it just a coincedence.
Old 04-05-2008 | 12:45 AM
  #17  
PChouinard's Avatar
Registered User
 
Joined: Nov 2002
Posts: 630
Likes: 0
From: Az
could it make the engine run lean,
No such a thing in a diesel.

I see two responses blaming winter fuel. One from Indiana and the other from Utah. What would winter fuel have to do with it? why don't we see a change in AZ?
Old 04-05-2008 | 08:23 AM
  #18  
FMB's Avatar
FMB
Registered User
 
Joined: Apr 2005
Posts: 1,221
Likes: 68
From: Old Norte Mexico
Originally Posted by Bad Ramer Jamer
I recently cleaned my afe filter. Would it mess the sensor up if I used too much oil.
Mess it up, youp! Kill it, noop, it just interfers with its reading. It is a combo IAT/MAP Sensor and is located on top of your intake manifold held in with 2 T-15 Torx head screws. Clean off the top of your manifold so you don't knock dirt in the hole, disconnect the harness, take the screws out, remove it, clean it with a cloth, check the condition of the o-ring, wet the o-ring with engine oil, put it all back together.
Keep oil off the sensor.
Back to my morning beverage.
Old 04-05-2008 | 08:55 AM
  #19  
GAmes's Avatar
Registered User
 
Joined: Mar 2006
Posts: 1,269
Likes: 0
From: Killeen, Tx
Originally Posted by PChouinard
I see two responses blaming winter fuel. One from Indiana and the other from Utah. What would winter fuel have to do with it? why don't we see a change in AZ?
Winter fuel is blended for the region. #1 diesel is blended with #2, the colder it gets, the more #1 which has fewer BTUs per gallon. Unless you live up by Flagstaff you won't see that much difference in AZ.
Old 04-05-2008 | 10:03 AM
  #20  
Bad Ramer Jamer's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 1,041
Likes: 3
From: IL
Originally Posted by FMB
Mess it up, youp! Kill it, noop, it just interfers with its reading. It is a combo IAT/MAP Sensor and is located on top of your intake manifold held in with 2 T-15 Torx head screws. Clean off the top of your manifold so you don't knock dirt in the hole, disconnect the harness, take the screws out, remove it, clean it with a cloth, check the condition of the o-ring, wet the o-ring with engine oil, put it all back together.
Keep oil off the sensor.
Back to my morning beverage.

I hate sounding dumb,,,but.

I have the afe stage 2 with the plastic tube. The map sensor is the one that I relocated to that tube,,,right. Moved from the stock air box.
Old 04-05-2008 | 10:42 AM
  #21  
FMB's Avatar
FMB
Registered User
 
Joined: Apr 2005
Posts: 1,221
Likes: 68
From: Old Norte Mexico
Originally Posted by Bad Ramer Jamer
I hate sounding dumb,,,but..
Not dumb at all. I would have asked too. I should have been more specific.

Originally Posted by Bad Ramer Jamer
I have the afe stage 2 with the plastic tube. The map sensor is the one that I relocated to that tube,,,right. Moved from the stock air box.
This is the "Inlet Air Temperature Sensor/Pressure Sensor". It needs to be clean also. The one on your intake manifold is your "Intake Air Temperature Sensor/MAP Sensor". Make sure both are clean.

BTW, they normally don't need cleaning cause by the time the air gets to them (both are past the filter), it is supposed to be clean. But if you add oil to the airstream at the filter (over-oil your filter), then all bets are off.
Back to morning refreshments.
Old 04-05-2008 | 03:06 PM
  #22  
dozer12216's Avatar
Registered User
 
Joined: Dec 2007
Posts: 2,738
Likes: 0
From: North Carolina or Kentucky. Take your pick
I tend to go with the change in fuel quality. Noticed my milage down for last couple months. Not as dramatic as yours, but definitelly down. Also you were pulling a three car trailer. One car sticking up high can really kill milage. Worst milage I get is with a tall load. Weight is easier than height.

Last edited by dozer12216; 04-05-2008 at 03:08 PM. Reason: add info
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lucas1
1st Gen. Ram - All Topics
39
12-10-2009 12:07 PM
Dually Driver
3rd Gen Engine and Drivetrain -> 2003-2007
13
11-13-2007 09:10 PM
Mark Hodowanec
3rd Gen Engine and Drivetrain -> 2003-2007
13
09-07-2006 11:35 AM
MARKY MARK
24 Valve Engine and Drivetrain
18
02-16-2003 01:31 AM
bigbaddiesel
12 Valve Engine and Drivetrain
4
10-25-2002 04:22 PM



Quick Reply: Horrible milage. What all could it be.



All times are GMT -5. The time now is 03:41 PM.